The SS400+ Spinner Spreader is designed for high-demand application environments, boosting productivity with wider spread patterns and optional dual-bin capability. Featuring Salford’s Sniper technology, it offers precise section control up to 120 feet for fertilizer and easily converts to a 70-foot lime swath. Its robust design ensures low maintenance and cost-effectiveness, maximizing chassis uptime and ROI. Covering 33% more land per pass, the SS400+ allows producers and commercial applicators to get more done in less time.

SPREAD FERTILIZER 120FT. & LIME 70FT. WITH ONE MACHINE

The SS400+ has a dual product application system capable of spreading fertilizer or lime. There is a simple process to change the spinners and flow dividers when switching between fertilizer and lime. The machine is capable of spreading fertilizer up to 120 feet, and lime up to 70 feet. *Maximum application widths are dependent on factors such as, but not limited to, product quality and wind speed.

40 CUBIC FOOT HOPPER

The hopper is capable of holding 427 cubic foot of fertilizer with a 65 pound product density, or 314 cubic feet of lime. 427 cubic foot capacity requires 10 inch hopper extensions that are not compatible with lime application.

The hopper features recessed bin screens for fast loading.

The hopper is 57 in. high, without extensions, giving a 102 in. loading height, depending on the chassis and tire configuration.

MULTI-BIN INSERT

The SS400+ can be equipped with a multi-bin insert for two product fertilizer application. The insert brings the applicators capacity to 377 cubic feet.
The insert has an inner bin segment that can be adjusted to change the capacity of the two bins.

Config 01: Front Bin – 209 cu-ft., Rear Bin – 166 cu-ft.
Config 02: Front Bin – 259 cu-ft., Rear Bin – 116 cu-ft.

12 SECTION CONTROL WITH FERTILIZER

The SS400+ has a simple, reliable, and durable 12-section swath control system when applying fertilizer.
The system has a split belt which divides the application swath into left and right sections. Then by controlling 1)belt speed, 2) spinner speed, and 3) flow divider position the swath can be adjusted to avoid over-application, or spreading into sensitive areas.

The flow divider is enclosed to accurately guide material onto the spinner disk. This makes the spreaders pattern less susceptible to wind.