Brillion WOL-3620-21

Two-Section Folding Models in 21’ Working Widths
Designed for Improved Trash Flow Through the Machine
Three Rows of Shanks of Overall 6″ Spacing
Two-Piece Edge Bent S-Tine Shanks for Better Leveling
25″ Under Frame Shank Clearance
18″ Between Shanks, Minimum of 24″ Between Rows
2″ Reversible Points
Maximum Shank Operating Depth of 5″
Two-Row Coil Tine Harrow in Front of Rear Roller
8″ Roller Axles
61mm Heavy-Duty Bearings
Choice of 20″ Notched Ductile Iron Wheels, 24″ Notched Ductile Iron Wheels, 20″ Crowfoot Ductile Iron Wheels or 20″ Optimizer Ductile Iron Wheels
Rear Scrapers Standard on Notched Rollers
Hitch Floats 10 Degrees Up, 35 Degrees Down
Wing Float 5 Degrees Down
Hydraulic Down Pressure for Even Machine Weight Distribution Across the Width of Machine
Independent Hydraulic Tooth Depth Control
Dual Transport Wheels
(4) 12.5LX15 F1 Tires
Cat. II, III or IV Hitch
Transport Height – 13’4″
Transport Width – 12’3″
LED Warning Lights & SMV Emblem
Safety Chain Kit
Powder Coat Paint

Model	WOL-3620-21
Approximate Weight	20,714 lbs. (9,396 kg)
Working Width	21 ft. 0 in. (6.4 m)
Transport Width	12 ft. 3 in. (3.7 m)
Transport Height	13 ft. 4 in. (4.1 m)
Overall Length (Transport)	31 ft. 3 in. (9.5 m)
Road Clearance	13 in. (330 mm)
Type of Pulverizer Wheel - Front	20 in. (500 mm) Optimizer Ductile Iron
Number of Pulverizer Wheels - Front	42
Type of Pulverizer Wheel - Rear	20 in. (500 mm) Notched Ductile Iron
Number of Pulverizer Wheels - Rear	65
Rear Roller Scrapers	Standard
Roller Axle Size	8 in. (203 mm)
Bearing Type	61 mm Heavy-Duty
Type of Shanks	Heavy-Duty Two-Piece Edge Bent S-Tine Shank 1.75 in. x 0.625 in. (44.5 x 15.9 mm)
Number of Shanks	42
Nominal Shank Spacing	6 in. (152 mm)
Maximum Shank Depth of Operation	5 in. (127 mm)
Under Frame Clearance	25 in. (635 mm)
Two-Row Coil Tine Harrow	Standard
Hitch	Pull-Type with Hydraulic Lift
Hitch Category	Cat. II, III or IV
Tire Size	(4) 12.5L x 15 FI
Hydraulic Circuits Required	3 (+1 for Rear Hitch)
Rear Hitch	Optional
Front Roller Scraper Kit	N/A
V-Leveler Kit	Optional
Hydraulic Down Pressure System	Standard
Independent Hydraulic Tooth Control	Standard
LED Warning Lights & SMV Emblem	Standard
Safety Chain Kit	Standard
Powder Coat Paint	Standard
Horsepower Requirements	9 to 10 HP (6.7 to 7.5 kW) per ft.
Recommended Operating Speed	6 to 8 MPH (10 to 13 km/h)

WOL-3620-21