- On Sale
- Build Your Own
- Used Equipment
- New Equipment
- Trade In
- Parts
- Service
- Aged Equipment Clearance
- Buy Online
- Precision Farming
-
- The Basics Of Haymaking
- Round Baler Basics for a 460M Round Baler
- How to Load Net Wrap on a 460M Round Baler
- Top 10 Implements For Livestock Operations
- How to store large round bales
- How to set up and operate a mower conditioner
- How to use a mechanical grapple
- Pick up grass clippings using a drive-over mower deck
John Deere TM14D Series Tandem Disk Harrows
Features
Disk Blades for a Variety of Conditions
Notched Front Blades come standard on the TM13 Tandem Disk Harrow, delivering an aggressive cut and sizing of material.
Rear Blades are available in two different configurations:
Smooth Rear Blade
The smooth rear blades offer better control of soil for light to medium soils, slicing and mixing residue and reducing clumps for a finer field finish.
Notched Rear Blade
The notched rear blade is ideal for heavy to medium conditions and provides excellent soil penetration, which enables a deeper tilling depth in tough soil conditions delivering a more aggressive cut.
Disk Blades come with 9” spacings to promote deeper tilling depths and aggressive cuts, while allowing material to easily flow through in between disk blades resulting in consistent job quality.
Gang Angle Adjustments Made Easy
Each disk gang on the TM13 can be adjusted individually from outside of the frame.
Toolless gang adjustments improve operator ease by eliminating the need to reach into the middle of the frame for disk gang adjustments. Easier adjustments will make it more convenient to precisely set the disk angle to match changing soil conditions and the desired finish. Use a more aggressive angle to tear up and penetrate rough and uneven soil or reduce the angle for smoother final seedbed preparation.
In addition to the individual gang adjustments, the TM13 front and rear gang angles are mismatched to enable straighter tracking in the field for a smoother finish.
Rolling Basket for Improved Field Conditions
To help break up clods for improved levelness and uniformity of field finish, an 11 in. diameter rolling basket can be added to the TM13. With just a wrench, the down pressure of the rolling basket can be adjusted to suit the conditions.
Code |
Description |
9210 |
Rolling Basket |
Attachment |
Description |
5RDF0092 |
Rolling Basket for TM1395 |
Scraper Kit to Remove Soil Buildup
Improve disk blade performance by removing soil buildup from disk blades in wet, sticky soil types with the Scraper Kit.
Code |
Description |
9000 |
Scraper Kit |
Attachment |
Description |
5RDF0088 |
Scraper Kit for TM1395 |
Furrow Filler Kit
The Furrow Filler Kit provides additional smaller-diameter disk blades to mount onto the outermost rear disk gangs, helping to fill in the furrow and eliminate ridging that can be created by the outermost disk blade.
Code |
Description |
9010 |
Furrow Filler Kit |
Attachment |
Description |
5RDF0090 |
Furrow Filler Kit for TM1395 |
iMatch™ Compatible
The TM13 comes iMatch™ compatible, making it quick & easy to switch implements.
Key Specs
Transport
Working
Dimensions
| Working Width | 96 in. |
|---|---|
| Overall Width, in. (cm) | 98 3/8 (250 cm) |
| Overall Height, in. (cm) | 48 (122 cm) |
| Overall Length, in. (cm) | 72 3/4 (185 cm) |
Disks
| Disk Spacing | 9 in. (22.9 cm) |
|---|---|
| Disk Thickness | 4.0 mm |
| Disk Diameter, in. (cm) | 22 in. |
| Number of Disks | 20 |
| Notched (front) / Notched (rear) | Optional |
| Notched (front) / Smooth (rear) | Optional |
Weight
| Operating Weight | 1346 lb |
|---|---|
| Weight per Disc (Approx.), lb (kg) | 65 |
Tractor requirements
| Engine HP Requirements | 45-100 |
|---|
Construction
| Gang / Frame Tubing | 4x3 Rectangle |
|---|
Frame
Hitch
| Category | Category 1 & Category 2 |
|---|---|
| iMatch / Quick hitch | Yes |
| Type | Integral |
| Height to Hitch Pins, in. (cm) | 20 in. |
Disk blades
Available blade sizes
Disk gangs
Lighting and safety
Tires
Gang Axle
| Diameter, in. | 1-1/8 |
|---|---|
| Type | Square |
| Material | AISI 1045 |
Gangle Angles
| Front Gang Angles | 6, 11, 16, 21 degree (angle) |
|---|---|
| Rear Gang Angles | 4,9,14,19 degree (angle) |
Tubing
| Gang / Frame Tubing | 3x3 square |
|---|
Hanger Bearing
| Bearing type | 1 1/8 SQ with steel flanges |
|---|---|
| Material Thickness | 3/16 U-shape x 3/8 Top plate |
Set-up time
| Approximate Assembly Time | 30 minutes |
|---|---|
| Scraper Kit | Option |
| Furrow Filler Kit | Option |
| Rolling Basket | Option |