- On Sale
- Build Your Own
- Used Equipment
- New Equipment
- Trade In
- Parts
- Service
- Aged Equipment Clearance
- Buy Online
- Precision Farming
-
- The Basics Of Haymaking
- Round Baler Basics for a 460M Round Baler
- How to Load Net Wrap on a 460M Round Baler
- Top 10 Implements For Livestock Operations
- How to store large round bales
- How to set up and operate a mower conditioner
- How to use a mechanical grapple
- Pick up grass clippings using a drive-over mower deck
John Deere WC12 Series Wood Chippers
Features
Adjustable discharge chute accurately discharges to desired location
Adjustable discharge chute with handle
Rotates 360 degrees
The discharge chute rotates 360 degrees for fast and easy positioning.
The chute also features an adjustable deflector to accurately direct the wood chips to the desired location.
Hydraulic feedroll mounted on spring-loaded frame
WC12 Series hydraulic feedroll frame
The hydraulic feedroll is mounted on a spring-loaded frame on the WC12 Series Wood Chippers, allowing it to raise up and down depending on the size of the timber going through.
The speed of the feedroll can be adjusted on the side of the wood chipper with the hydraulic flow valve.
Reversible feedroll has three positions that are easy to adjust on the feed box
Feed box with handle
Reversible feedroll
Engagement of the feedroll is done by pushing or pulling the handle that wraps around the outside of the feed box. The feedroll has three positions: neutral, reverse, feed (forward).
The feedroll grabs the material as it is fed into the chipper and allows the operator to step away while it automatically pulls material into the knives.
Self-contained hydraulic kit for WC12 Series Wood Chippers
Dimensions
| Chip opening | 229x406 mm 9x16 in. |
|---|---|
| Hopper opening | 711x1067 mm 28x42 in. |
Feed options
| System | Hydraulic |
|---|---|
| Feed_x001A_roller diameter | 393.7 mm 15.5 in. |
| Hopper height | 68.6 cm 27.5 in. |
Chip chute
| Fixed | |
|---|---|
| Adjustable | Rotation: 360 degree (angle) |
Weights
| Unit | 1161.2 kg 2560 lb |
|---|---|
| Rotor style | Drum |
| Rotor | 222.3 kg 490 lb |
Tractor compatibility
| PTO rpm | 540 rpm |
|---|---|
| HP range (Tractor PTO hp) | 56-86 kW 75-115 hp |
3-Point hitch
| Category | Pull-type |
|---|---|
| iMatch™ or Quik-Coupler |
Hydraulics
| Requirements | 30.3 L/min 8 gpm |
|---|---|
| Self-contained system | Optional |
Chipping
| Knife quantity | Two |
|---|---|
| Knife size | 1.59x11.43x22.86 mm 0.625x4.5x9 in. |
| Knife bolt | Gr 8 hex head bolts: 15.9 mm 0.625 in. |
| Shear bar | A8 Hardened Anvil |
| Rotor rpm | 2050 rpm |
Belt drive system
| Number | Five |
|---|---|
| Type | B-7 banded belt |
Set-up time
| Labor hours | 0.5 |
|---|
Warranty
| Time period | 1 year |
|---|
Additional information
| Date collected |
|---|