- On Sale
- Build Your Own
- Used Equipment
- New Equipment
- Trade In
- Parts
- Service
- Aged Equipment Clearance
- Buy Online
- Precision Farming
-
- The Basics Of Haymaking
- Round Baler Basics for a 460M Round Baler
- How to Load Net Wrap on a 460M Round Baler
- Top 10 Implements For Livestock Operations
- How to store large round bales
- How to set up and operate a mower conditioner
- How to use a mechanical grapple
- Pick up grass clippings using a drive-over mower deck
John Deere DH52 Series Offset Disks
Features
Adjustable disk blade scrapers increase productivity
Scrapers clean disk blades
Scrapers work great in wet and sticky soils
Adjustable disk blade scrapers keep disk blades clean and performing in wet and sticky soils for increased productivity.
Clevis hitch is durable for those tough working conditions
Clevis hitch makes hookup easy
Clevis hitch is built strong for tough jobs
The clevis hitch has a durable design and is designed for ease of use, long life, and tough working conditions.
Disk blades (notched or smooth) available in two sizes
Notched disk blades
Smooth disk blades
Disk blades are available in 66-cm or 71-cm (26-in. or 28-in.) diameters. Disk blades are available in smooth blades, notched blades, or a combination of front notched blades and rear smooth blades to meet a variety of needs.
For superior penetration in tough soil conditions, weight per blade ranges from 108.9 kg to 154.7 kg (240 lb to 341 lb) depending on the offset disk series and model.
End washers and wrenches keep gang shaft end nut tight
Keeping gangs tightened increases wear life
Gang nut wrenches are always there when needed
End washers help keep the gang shaft end nut tightened during operation, increasing gang wear life.
Two gang nut wrenches are supplied with each unit and securely attached to the unit, ready to use when the gangs need tightening.
Oil bath tapered roller bearings minimize maintenance
Minimal maintenance increases work hours
Sealed with industrial-grade seals
Oil bath tapered roller bearings, sealed with industrial-grade seals, keep maintenance to a minimum and profitable working hours at a maximum. The bearings come complete with a wear plate.
Rear hitch for attaching an additional implement
Allows operator to pull an additional implement
A rear hitch is available for operators wanting to pull an additional implement such as a harrow or drag.
Transport locks secure disk wings
Transport locks secure disk wings cylinder
Transport locks are standard, ensuring disk wings are in secure transport mode.
Two separate control arms create consistent performance
Control arms level in ground and during transport
Easy to set for desired soil condition
Two separate control arms are standard, one for transport leveling and one for leveling while the disk is in the ground. Once set for a given soil condition, the disk will continue to perform with consistency.
Transport
| Width | 6.1 m 20 ft |
|---|---|
| Ground clearance with base blades | 20.3 cm 8 in. |
| Wheel hub bearings | Dual tapered roller bearings |
Working
| Approximate working width | 5.8 m 19 ft |
|---|---|
| Maximum penetration | 22.9 cm 9 in. |
Weight
| Net | 5012.2 kg 11050 lb |
|---|---|
| Weight per disk blade | 116.6 kg 257 lb |
Tractor requirements
| Recommended PTO hp range | 149-175 kW 200-235 hp |
|---|---|
| Recommended drawbar hp range | 126.8-149.1 kW 170-200 hp |
Frame
| Type | Single offset rigid |
|---|---|
| Duty | Medium |
| Tube size | 15.2x15.2x0.95 cm 6x6x0.375 in. |
Hitch
| Front hitch type | Spade |
|---|
Disk blades
| Spacing | 26.7 cm 10.5 in. |
|---|---|
| Quantity | 45 |
| Type | Notched (front) Notched (rear) Standard Smooth (front) Smooth (rear) Optional Notched (front) Smooth (rear) Optional |
| Blade concavity | Standard: high Optional: low |
Available blade sizes
| Blade option one | 660x7.9 mm 26x0.312 in. |
|---|---|
| Blade option two | 711x7.9 mm 28x0.312 in. |
Disk gangs
| Front angle | 2 Positions |
|---|---|
| Rear angle | 2 Positions |
| Axle size | 4.1 cm 1.625 in. or 5.4 cm 2.125 in. |
| Axle material | Round heat treated alloy steel threaded on both ends |
| Bearing type | Oil Bbth tapered roller |
| Bearing wear plates | Standard |
| Bearing standards | Welded, Reinforced |
| Scrapers | Adjustable |
Lighting and safety
| Markings | SMV |
|---|---|
| Safety tow chain | Yes |
| Lights | Yes |
Tires
| Type | Implement - Quantity of 4 |
|---|---|
| Size | 12.5L x 15 10 ply in. |
| Wheel hub type | 8 Bolt |
Set-up time
| Labor hours | 2-3 for two people |
|---|
Warranty
| Time period | 1 year |
|---|