5614 Tec Drive Avon, NY 14414
(585) 226-9680
Open today at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
7689 Ridge Road West Brockport, NY 14420
(585) 637-3700
Open today at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
2818 Earlystown Road Centre Hall, PA 16828
(814) 364-1421
Open today at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
9570 County Rd Clarence, NY 14032
(716) 741-9115
Open today at 8:30am
  • View all hours
    • Monday 8:30am to 5pm
      Tuesday 8:30am to 5pm
      Wednesday 8:30am to 5pm
      Thursday 8:30am to 5pm
      Friday 8:30am to 5pm
      Saturday 8:30am to 12pm
      Sunday Closed all day
8926 W. Main Street Clymer, NY 14724
(716) 355-4236
Open today at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
49290 State Route 14 East Palestine, OH 44413
(330) 426-2166
Open today at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
13521 Cambridge Springs Rd. Edinboro, PA 16412
(814) 734-1552
Open today at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
7852 RT 66 Fairmount City, PA 16224
(814) 764-5159
Open today at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
1756 Lindquist Drive Falconer, NY 14733-9720
(716) 665-3110
Open today at 8am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 8am to 1pm
      Sunday Closed all day
817 Tobias Road Halifax, PA 17032
(717) 362-3132
Open today at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
4751 County Road 5 Hall, NY 14463
(585) 526-6325
Open today at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
8011 Paxton St. Harrisburg, PA 17111
(717) 583-2101
Open today at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
185 Route 31F Macedon, NY 14502
(585) 425-4428
Open today at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
5809 William Penn Highway Mifflintown, PA 17059
(717) 436-5553
Open today at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
7615 Lewiston Road Oakfield, NY 14125
(585) 948-5261
Open today at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
13330 Rt.31 Savannah, NY 13146
(315) 594-0115
Open today at 8am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
336 Vaughn Street Springville, NY 14141
(716) 592-4058
Open today at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 1pm
      Sunday Closed all day
4488 Greenville-Sandy Lake Rd. Stoneboro, PA 16153
(724) 376-3740
Open today at 8am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
141 Byers Lane Watsontown, PA 17777
(570) 538-3557
Open today at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
LandPro Equipment; NY, OH & PA

John Deere 2680H High Performance Disk

2680H  High Performance Disk Model Photo

 

Features

Wide range of working widths available to match acreage and power requirements

Integral three-point rigid machine Integral three-point rigid machine
Three-section drawn machine Three-section drawn machine

The 2680H High-Performance Disk gives operators the ability to cover acres quickly, increasing their productivity. This two-season tool can operate up to 22.5 km/h (14 mph) in field.

 

This tool is available in fifteen configurations from 2.4 m to 13.7 m (8 ft to 45 ft). The 2680H requires 34.25 kW/m (14 hp/ft), but in certain hilly, soft, or wet conditions it may require an additional 25 percent engine horsepower to maintain operating speeds at preferred working depth.

Integral three-point rigid models
Working width Productivity per hour at 18.5 km/h (11.5 mph)*
2.5 m (8 ft, 4 in.) 4.7 ha (11.6 acres)
3.05 m (10 ft) 5.6 ha (13.9 acres)
3.6 m (11 ft, 8 in.) 6.6 ha (16.3 acres)

 

One-section drawn models
Working width Productivity per hour at 18.5 km/h (11.5 mph)*
2.5 m (8 ft, 4 in.) 4.7 ha (11.6 acres)
3.05 m (10 ft) 5.6 ha (13.9 acres)
3.6 m (11 ft, 8 in.) 6.6 ha (16.3 acres)

 

Two-section drawn models
Working width Productivity per hour at 18.5 km/h (11.5 mph)*
4.85 m (15 ft, 11 in.) 9.0 ha (22.2 acres)
5.4 m (17 ft, 7 in.) 9.8 ha (24.3 acres)
6.4 m (20 ft, 11 in.) 11.8 ha (29.2 acres)
7.4 m (24 ft, 4 in.) 13.7 ha (33.9 acres)
Three-section drawn models
Working width Productivity per hour at 18.5 km/h (11.5 mph)*
7.6 m (25 ft) 14.1 ha (34.8 acres)
9.1 m (30 ft) 16.9 ha (41.8 acres)
10.7 m (35 ft) 19.7 ha (48.8 acres)
12.2 m (40 ft) 22.6 ha (55.8 acres)
13.7 m (45 ft) 25.4 ha (62.7 acres)

 

*NOTE: Minimum overlap of 15.2 cm (6 in.).

Individually mounted blades

Individually mounted blades Individually mounted blades
Rubber torsion elements Rubber torsion elements

The 2680H High-Performance Disk features individually mounted blades. These blades, supported by rubber torsion elements, can travel up to 22.9 cm (9 in.) while passing over an obstruction, like a rock. This allows the rest of the tool to remain engaged and continue working, allowing for better ground contour.

Keep the tool engaged while passing over obstructions Keep the tool engaged while passing over obstructions

To also follow ground contour, wings on the three-section machines flex to stay engaged on hilly or terraced ground.

Wings follow the ground contour Wings follow the ground contour

Blades are also easy to replace. Rather than having to remove an entire gang, just replace an individual blade.

Rear attachment options to match the operation

Cage roller Cage roller
Spring roller Spring roller
Rubber roller Rubber roller

Producers can choose from three rear attachment options to match their operation. Options include a cage roller, spring roller, and rubber roller.

 

The cage roller is the most versatile option. Choose this rear attachment if the primary application is fall tillage. It works in all soil types and conditions and has a diameter of 64.8 cm (25.5 in.).

 

The spring roller is the most specialized. It works in light/medium soils and can provide a level seedbed with additional firming. Individually mounted tines work to prevent plugging of the roller. Avoid using it in rocky ground. It has a diameter of 62.2 cm (24.5 in.).

 

The rubber roller is best for firming and preparing a seedbed in the spring. It works best in lighter drier soils where a firm finish and anchored residue is a primary concern. This rear attachment works in most soil types and features a hydraulically adjustable scraper. It has a diameter of 63.5 cm (25 in.).

TruSet™ Tillage provides precise control from the cab on the go

TruSet allows for adjustments from the cab

 

Integrated TruSet Tillage technology enables 2680H operators to respond to changing field conditions such as varying soils, heavier residue, and moisture by adjusting depth while on the go.

TruSet depth control

With short windows of time to perform tillage operations, TruSet can provide significant productivity improvements as operators can adjust the 2680H with the push of a button while covering acres. By responding to conditions as they change throughout the field, TruSet enables operators to generate a better-quality tillage performance with the first pass.

TruSet on a 4640 Universal Display TruSet on a 4640 Universal Display
Selective control valve (SCV) setup Selective control valve (SCV) setup

In addition to controlling depth, the tilt and fold SCVs are automatically set to float with TruSet engaged. This feature eliminates the need for the operator to manually place these SCVs in float, preventing machine damage.

Tillage documentation and prescription functionality included with TruSet™ Tillage

With integrated TruSet Tillage technology, 2680H operators can incorporate documentation and prescription functionality into their tillage operations. The tillage documentation feature gives producers the ability to capture and analyze the 2680H pass for additional coverage of the crop production cycle. Prescription functionality allows producers to ensure their tillage operations are executed correctly, optimizing their investment in preparing for the next crop.

Operators can document data for the depth of their 2680H. By creating an as-applied map based off of global positioning system (GPS) data for the job performed by each functional area on the implement, TruSet enables producers to document their tillage passes then later review and analyze the data for future agronomic decisions.

Additionally, the Prescription Creator by Agrian® company (a connected partner tool through the John Deere Operations Center™ application) enables producers to create prescriptions for each functional area on the 2680H. Data from previous yields, soil surveys, or freehand drawing tools can be used to create prescriptions that command the implement to the desired depth for optimum agronomic results.

Agrian is a trademark of Agrian, Inc.

Key Specs

Working width 3.56 m
11.67 ft
Transport width 3.83 m
12.58 ft
Transport height 3.07 m
10.08 ft
Working depth 5.1 to 15.2 cm
2 to 6 in.
Blade spacing 25.4 cm
10 in.
Horsepower per ft 10.4 kW or more
14 hp or more
Operating speed 16.1 to 22.5 km/h
10 to 14 mph

Machine

Working width 3.56 m
11.67 ft
Transport width 3.83 m
12.58 ft
Transport height 3.07 m
10.08 ft
Gang standards
Gang angle
Purpose Primary/Secondary
Working depth 5.1 to 15.2 cm
2 to 6 in.
Weight per blade 137 kg
302 lb
Blade size 50.8 cm
20 in.
Blade spacing 25.4 cm
10 in.
Horsepower per ft 10.4 kW or more
14 hp or more
Operating speed 16.1 to 22.5 km/h
10 to 14 mph
Blade concavity
Blade thickness

Number of blades

Front blades 14
Rear blades 14
Total 28

Number of C-Springs

Main frame front
Main frame rear
1st wing front
1st wing rear
2nd wing front
2nd wing rear
Total

Additional information

Date collected