5614 Tec Drive Avon, NY 14414
(585) 226-9680
Open tomorrow at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
4540 W. Saile Dr Batavia, NY 14020
(585) 948-5261
Open tomorrow at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
7689 Ridge Road West Brockport, NY 14420
(585) 637-3700
Open tomorrow at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
2818 Earlystown Road Centre Hall, PA 16828
(814) 364-1421
Open tomorrow at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
9570 County Rd Clarence, NY 14032
(716) 741-9115
Open tomorrow at 8:30am
  • View all hours
    • Monday 8:30am to 5pm
      Tuesday 8:30am to 5pm
      Wednesday 8:30am to 5pm
      Thursday 8:30am to 5pm
      Friday 8:30am to 5pm
      Saturday 8:30am to 12pm
      Sunday Closed all day
8926 W. Main Street Clymer, NY 14724
(716) 355-4236
Open tomorrow at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
49290 State Route 14 East Palestine, OH 44413
(330) 426-2166
Open tomorrow at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
13521 Cambridge Springs Rd. Edinboro, PA 16412
(814) 734-1552
Open tomorrow at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
7852 RT 66 Fairmount City, PA 16224
(814) 764-5159
Open tomorrow at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
1756 Lindquist Drive Falconer, NY 14733-9720
(716) 665-3110
Open tomorrow at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
817 Tobias Road Halifax, PA 17032
(717) 362-3132
Open tomorrow at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
4751 County Road 5 Hall, NY 14463
(585) 526-6325
Open tomorrow at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
8011 Paxton St. Harrisburg, PA 17111
(717) 583-2101
Open tomorrow at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
185 Route 31F Macedon, NY 14502
(585) 425-4428
Open tomorrow at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
5809 William Penn Highway Mifflintown, PA 17059
(717) 436-5553
Open tomorrow at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
13330 Rt.31 Savannah, NY 13146
(315) 594-0115
Open tomorrow at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
336 Vaughn Street Springville, NY 14141
(716) 592-4058
Open tomorrow at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
4488 Greenville-Sandy Lake Rd. Stoneboro, PA 16153
(724) 376-3740
Open tomorrow at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 8am to 12pm
      Sunday Closed all day
141 Byers Lane Watsontown, PA 17777
(570) 538-3557
Open tomorrow at 7:30am
  • View all hours
    • Monday 7:30am to 5pm
      Tuesday 7:30am to 5pm
      Wednesday 7:30am to 5pm
      Thursday 7:30am to 5pm
      Friday 7:30am to 5pm
      Saturday 7:30am to 12pm
      Sunday Closed all day
3907 Route 19 Silver Springs, NY 14550
(585) 591-1670
Open tomorrow at 8am
  • View all hours
    • Monday 8am to 5pm
      Tuesday 8am to 5pm
      Wednesday 8am to 5pm
      Thursday 8am to 5pm
      Friday 8am to 5pm
      Saturday Closed all day
      Sunday Closed all day
LandPro Equipment; NY, OH & PA

John Deere iGrade™

iGrade™  iGrade™ Model Photo

 

Features

Spend more time operating and less time moving laser components

Leave the frustrations of a laser system’s setup and maximum operating range behind. iGrade™ leveling system is a global positioning system (GPS) based water management system that can be used up to 2 km (1.2 miles) from an RTK base station.  

 

iGrade’s performance is not affected by factors that traditionally impact lasers such as dust, wind, and operating at night. This allows more work to be done without the hassle of moving base stations or waiting for outside conditions to improve.

 

iGrade is not intended for precise, finish-grading applications. While users may experience sub-inch grading performance, environmental variations could cause vertical accuracy to vary up to +/- 5 cm (2 in.) from pass to pass. Click here to learn more about StarFire receiver vertical accuracy.

Eliminate manual adjustments

An iGrade™ leveling system activation (requires Application Controller 1100) reduces operator fatigue by automatically controlling the height of the scraper blade in water management applications. Manual adjustments are no longer needed.

iGrade teams up with the Application Controller 1100 to constantly keep the scraper on grade, allowing the operator to spend more time focusing on the machinery and task.

Utilize many of the same John Deere components already owned

An iGrade™ leveling system activation works with many of the different John Deere Precision Ag Technology components that producers may already own such as:

  • 4600 CommandCenter™ Display/4640 Universal Display
  • 4200 CommandCenter Display/4240 Universal Display
  • GreenStar™ 3 2630 Display
  • StarFire™ 3000 Receiver or StarFire 6000 Receiver
  • AutoTrac™ assisted steering system
  • Surface Water Pro™ Plus software on GreenStar 3 2630 and GreenStar 2 2600 Displays only

It requires a vehicle global positioning system (GPS) only; the receiver must have an SF2 or greater signal level.

NOTE: Do not mismatch generations. If a StarFire 3000 is used on the machine, a StarFire 3000 must be used on the implement if utilizing a second receiver for specific operation.

NOTE: See this link for further StarFire 6000 compatibility information.

iGrade is approved for the following platforms:

  • Compatible tractors:
    • Non-John Deere tractors, 60 Series and older tractors, 5XXX, 6X00, 6X10, 6X30, 7X00, 7X10, and Small- Frame 7X20/7X30 Tractors
      • Compatible using external selective control valve (SCV) and external SCV switch.
    • 7X20 small frame, 8X00, 8X10, 8X20, 9X00, 9X10, and 9X20
      • Compatible using John Deere legacy SCV. Running with John Deere legacy requires using SCVs 1 or 3 and connecting the UCC harness to the option connector at the rear of the tractor cab.
    • 7X30, 8X30, U8, 9X30, 6R (Final Tier 4 [FT4] only), 7R, 8R/RT, and 9R/RT/RX
      • Compatible using John Deere proprietary SCV type. Any SCVs can be used and an option connector is not used.
    • 6R, 6M*, 7R, 8R/RT, and 9R/RT/RX
      • Compatible using ISO SCV type. Any SCVs can be used and an option connector is not used.
      • *When equipped with optional electronic SCVs.
    • AutoTrac compatibility
      • Compatible with integrated AutoTrac, AutoTrac Controller, and AutoTrac Universal

iGrade requires the receiver to have an RTK signal level. iGrade does not support WAAS, EGNOS, SF1, SF2, or SF3 signal levels.

The John Deere Application Controller 1100 is required for iGrade activation.

Harness compatibility

UCC2 Application Controller 1100 (serial number PCXL01C201000+) is not compatible with original UCC1 Application Controller 1100 harnessing. Plugging the UCC2 controller into UCC1 harnessing will cause CAN bus issues due to no terminator in the circuit. 

Harness options

Ensure UCC2 main harness PFA11888 is used with the UCC2 Application Controller and replaces the existing harness connection. Adaptor harness schematics are available in the Technical Manual to create a wiring adaptor from UCC2 Application Controller 1100 to the existing harnessing from a UCC1 system.

Minimize earthmoving costs with cut-fill maps

Cut-fill maps Cut-fill maps

Cut-fill maps allow producers to create desired contours by moving the least amount of earth. Cut-fill maps provide best-fit or multi-fit plane designs. Beyond land leveling, this solution can be used for infrastructure design of surface drainage, contours, and terraces.

 

iGrade™ leveling system offers cut-fill maps when teamed up with additional software and hardware. Learn more about iGrade and cut-fill maps from a local John Deere dealer.

Maximize vertical accuracy with the use of the iGrade™ StarFire™ Global Navigation Satellite System (GNSS) antenna

The StarFire 6000 Receiver is not currently compatible with external antennas. The vertical accuracy performance of the StarFire 6000 with internal antenna for iGrade applications is similar to that of the StarFire 3000 with external iGrade antenna.

The iGrade StarFire GNSS antenna (iGrade antenna) facilitates enhanced performance of the implement’s StarFire 3000 Receiver when utilized for iGrade that requires maximum vertical precision.

Vertical accuracy can be impacted by signal interference that the StarFire 3000 Receiver is susceptible to, such as multipath. The iGrade antenna resists signal interference, allowing for the rejection of error that can typically be caused by multipath effects. It is compatible with global positioning system (GPS) offering L1, L2, and L5 satellite signals and Russian satellite constellation (GLONASS) offering G1 and G2 satellite signals, as well as the StarFire network (L-band), making it an excellent enhancement to the StarFire 3000 Receiver.

The iGrade antenna is only necessary for iGrade users demanding the highest possible vertical accuracy for their applications and should not be installed on the following:

  • Tractor-mounted receivers
  • Implement receivers in horizontal-accuracy-only applications

The iGrade antenna is only compatible with StarFire 3000 Receivers and is only intended for use on the implement receiver utilizing iGrade or other earthmoving applications. The StarFire 3000 Receiver must remain mounted to the same implement as the iGrade antenna being utilized. Use of the iGrade StarFire GNSS antenna in any other manner is neither permitted nor supported and can degrade desired performance of the paired receiver.

NOTE: Do not mismatch generations. If a StarFire 3000 is used on the machine, a StarFire 3000 must be used on the implement.

The iGrade antenna is recommended for commercial and high-use operators of iGrade using StarFire 3000 Receivers. Use of the iGrade antenna generally improves performance when experiencing conditions described above, but does not guarantee sub-inch grading accuracy.

Generation 4 display compatibility

This document lists all the compatible equipment approved with the software update 21-2 release and is subject to change with newer software updates. To ensure complete and proper compatibility, the most current version of implement control unit software, Generation 4 display software, or compatible farm management information software (FMIS) should be used. Non-current software versions will require an update before support can be provided. Unapproved software version configurations will not be supported.


The software update 21-2 release is not compatible with 4600 CommandCenter™ v1 processors. Software update 17-2 is the last release that was compatible with 4600 v1 processors.

Server serial numbers are as follows:

  • v1 = RWG prefix
  • v2 = PCG prefix
Machine compatibility

John Deere Large Ag Tractors

John Deere Large Ag Tractors
(list of all automatically detected machines)
Model year CommandCenter Universal Display
4600 v2 4200 4640 4240
9R/9RT/9RX Series 2018 and newer X --- X X
9R/9RT/9RX Series 2015-2017 * --- X X
9R/9RT Series 2012-2014 --- --- X X
9030/9030T Series 2008 and newer --- --- X X
9020/9020T Series 2002-2007 --- --- X ---
9000 Series 1997-2001 --- --- X ---
9000T Series 2000-2001 --- --- X ---
8R/8RT Series 2018 and newer X --- X X
8R/8RT Series Mid-2014 - 2017 * --- X X
8R/8RT Series 2010-2013 --- --- X X
8030/8030T Series 2006 and newer --- --- X X
8020/8020T Series 2002-2005 --- --- X ---
8010/8010T Series 2000-2002 --- --- X ---
8000 Series 1994-1999 --- --- X ---
8000T Series 1997-1999 --- --- X ---
7R Series 2018 and newer X X X X
7R Series 2014-2017 * --- X X
7R Series 2011-2013 --- --- X X
7J Series 2018 and newer --- --- X X
7030 Series 2007 and newer --- --- X X
7030 Series (Large Frame) 2007 and newer --- --- X X
7030 Series (Small Frame) 2006 and newer --- --- X X
7020 Series 2003-2007 --- --- X X
6030 Series (Small Frame) 2006 and newer --- --- X X
6R Series 2018 and newer X X X X
6R Series (Final Tier 4) 2015-2017 * --- X X
6R Series (Interim Tier 4) 2013-2015 --- --- X X
6M Series 2013 and newer --- --- X X
6J Series 2018 and newer --- --- X X
5R Series 2019 and newer --- --- X X

*NOTE: For latest Precision Ag functionality, update machines equipped from the factory with v1 processor to v2.

John Deere Nutrient Applicators

John Deere Nutrient Applicators

Model year CommandCenter Universal Display
4600 v2 4200 4640 4240
F4365 High-Capacity Nutrient Applicator 2017 and newer X --- --- ---

John Deere Self-Propelled Sprayers

John Deere self-
propelled sprayers
Model year CommandCenter Universal Display
4600 v2 4200 4640 4240
400 and 600 Series Sprayers/4023 2022 and newer X --- --- ---
4 Series Sprayers 2018 - 2021 X --- --- ---
4 Series Sprayers  2013 - 2017 --- --- X** ---
4940 2012 - 2014 --- --- X** ---
4630 2008 and newer --- --- X** ---
4730 2008 and newer --- --- X** ---
4830 2008 - 2014 --- --- X** ---
4930 2008 - 2013 (serial number 4000+) --- --- X** ---
4720, 4920 2004-2007 --- --- X** ---
4710 2001-2004 --- --- X** ---
Hagie™ sprayers 2014 and newer Compatible with GreenStar™ 3 2630 Displays and 4640 Universal Displays*

*NOTE: When using the 4640 Universal Display on a Hagie Sprayer, additional mounting and harnessing may be required.

  • 4640 RAM™ mount - SJ34503
  • 4640 power/video harness - BPF11527 (1-3 video plus machine power), PF90687 (machine power only)

NOTE: Current John Deere/Hagie field kits only offer GreenStar 3 2630 Display parts.

NOTE: Multi-rank section control are not supported on Hagie at this time.

NOTE: VIN detection on Hagie Sprayers is only supported on model year 2019 and newer machines.

NOTE: 21-1 and newer software allows the Gen 4 4640 Universal Display to control the Hagie/Montag Fortifier configuration.


**NOTE: The 4640 Universal Display will replace the GreenStar 3 2630 Display on the armrest. Dual display with the GreenStar 3 2630 Display is not supported with sprayers. The 4640 Universal Display does not use the external display navigation buttons located on the armrest, so these buttons are disabled in this configuration.

John Deere Self-Propelled Forage Harvesters (SPFH)

John Deere SPFH

Model year CommandCenter Universal Display
4600 v2 4200 4640 4240
9000 Series SPFH 2019 and newer --- --- X ---
8000 Series SPFH 2015 and newer --- --- X ---

 

NOTE: When adding the 4640 Universal Display to a John Deere SPFH, it will only be compatible as a precision ag display and is installed on the side rail.

John Deere Combines

John Deere Combines Model year CommandCenter Universal Display
4600 v2 4200 4640 4240
S700 Series 2018 and newer X --- --- ---
S430 and S440 2017 and newer X --- --- ---
S600 Series 2012 - 2017 --- --- X* X*
S540 and S550 Series 2012 and newer --- --- X* X*
T-Series 2012 and current --- --- X* X*
70 Series 2008 - 2013 --- --- X* X*
60 Series 2004 - 2007 --- --- X* ---
50 Series 2000 - 2003 --- --- X* ---

NOTE: Competitive equipment may be compatible with 4640 Universal Display and 4240 Universal Display.

*NOTE: When adding the 4640 Universal Display to a John Deere combine, it will only be compatible as a cornerpost precision ag display.

NOTE: RowSense™ sensor voltage readings and sensor offsets are displayed on Original GreenStar Monitor emulator on 50, 60, and 70 Series Combines.

John Deere Cotton Harvesters

John Deere
Cotton Harvesters
Model year CommandCenter Universal Display
4600 v2 4200 4640 4240
CP690 2015 and newer --- --- X ---
CS690 2015 and newer --- --- X ---

NOTE: Update cab controller software to the latest version on model year 2017 and newer cotton harvesters to use Harvest Identification, Cotton Pro.

NOTE: When adding the 4640 Universal Display to a John Deere Cotton Harvester, it will only be compatible as a cornerpost precision ag display.

John Deere Self-Propelled Windrowers

John Deere Self-Propelled
Windrowers

Model year CommandCenter Universal Display
4600 v2 4200 4640 4240
W235 2014 and newer --- --- X X
W260 2015 and newer --- --- X X
W110 to W170*       X X

NOTE: When adding the 4640 Universal Display to a John Deere self-propelled windrower, it will only be compatible as a cornerpost precision ag display.

*NOTE: For 21-2, a virtual windrower option is available to support W110 to W170 Self-Propelled Windrowers. VIN detection is not available on these machines.

Equipment compatibility

John Deere planters

SeedStar™ 4HP planters are only compatible with 4600 CommandCenter displays with a version 2 (v2) processor and 4640 Universal Displays. Displays should be running the most current version of tractor applications to be compatible with SeedStar 4HP planter applications. Additionally, dual-display mode is available for use with SeedStar 4HP planter applications, along with Generation 4 Extended Monitor. SeedStar 4HP planters are compatible with no more than two GreenStar Rate Controllers.

The SeedStar 2 configuration below is available only on factory-installed model year 2011 and newer planters and may be field-installed on model year 2009 and 2010 planters. Green PM/PA controllers (factory-installed on model year 2009 and 2010 planters) are not supported with a Generation 4 display.

Service ADVISOR™ is needed to update SeedStar 2, SeedStar XP, and SeedStar 3 HP software. Documentation is not supported when using a rate controller to control row clutches on a John Deere planter.

 

John Deere planters Control unit name Software version (or newer) CommandCenter Universal Display
4600 v2 4200 4640 4240*
SeedStar 2
Black PM1 22.0 X X X X
Black PA1, (if available PA 2) 22.0 X X X X
Green PM1 10.11 --- --- --- ---
Green PA1 (if available PA 2) 10.11 --- --- --- ---
SeedStar XP
Black PM1 22.0 X X X X
Black PA1, (if available PA 2) 22.0 X X X X
PM2 7.0 X X X X
SeedStar 3 HP
Planter Main A (PCMA) 6.0 X X X X
Planter Main B (PCMB or MMC) 8.0 X X X X
Row-unit Controller (RUC) 2.0 X X X X
EPG 3.0 X X X X
SeedStar 4HP
Planter Apps 10.4.332-12 X --- X ---
Planter Main A (PMCA) 6.0 X --- X ---
Planter Main B (PMCB or MMC) 10.0 X --- X ---
Row-unit Controller (RUC) 4.0 X --- X ---
Electrical Power Generation (EPG) 5.0 X --- X ---
Electrical Power Module, 2 (PC2) 4.0 X --- X ---
ExactRate™ liquid fertilizer system Master Nozzle Control Unit (MNC) 2.0 X --- X ---
Spray Rate Control Unit (SRC)  2.0 X --- X ---
Liquid Blockage Controller (LBC) 2.0 X --- X ---
Nozzle Control Unit (NZC) 6.04 X --- X ---
ExactRate app  10.1.269-64 X --- X ---

*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 radar speed kit.

John Deere Air Seeders

The C650 and C850 Air Carts and N500C Seeder are not supported with a GreenStar 3 2630 Display. Additionally, tow-behind C850 Air Carts are compatible with AutoTrac™ Implement Guidance (passive) with software update 18-2 and newer.

 

John Deere Air Seeder Model year/control unit name Software version (or newer)  CommandCenter Universal Display
4600 v2 4200 4640 4240*
C650/850 Air Cart
Cart Master Controller (CMC) 3.0 X X X X
Mini Tank Controller (TCX) 2.0 X X X X
Front, Middle, Rear Tank Controller (TCU) 2.0 X X X X
1870 Seeding Tool - TruSet™ system 2017 and newer (IDC) 5.0 X X X X
1870 Seeding Tool - RelativeFlow™ blockage sensors 2017 and newer (BMU) 6.0 X X X X
1910 Air Cart - ground drive 2009 and newer 3.0 X X X X
1910 Air Cart - hydraulic drive
2013 and newer 11.0 X X X X
Seeding tools with air-run blockage - primary blockage
2009 and newer (BMU) 12.0 X X X X
Seeding tools with air-run blockage - air-run blockage 2009 and newer (BMU) 12.0 X X X X
Member Module 5.0 X X X X
1990 Central Commodity System (CCS™)
2009 and newer (BMU) 12.0 X X X X
N500C Series Seeder apps 10.2.19-13 X --- X ---
SMCA or SMC 4.0 X --- X ---
SMCB or BMU 3.0 X --- X ---
EPG 3.0 X --- X ---

*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 radar speed kit.

John Deere Tillage

John Deere Tillage Control unit name Software version (or newer)  CommandCenter Universal Display
4600 v2 4200 4640 4240
AccuDepth™ cultivator Implement Depth Control (IDC) 11 X X X X
2730 with TruSet
Tillage Controller 1 (TC1) 2.66K9 X X X X
2230 with TruSet Tillage Controller 1 (TC1) 2.75K6 X X X X
2330 with TruSet Tillage Controller 1 (TC1) 2.35K6 X X X X
2620/2630 with TruSet Tillage Controller 1 (TC1)

2.95K6

X X X X
2720 with TruSet Tillage Controller 1 (TC1) 2.24K6 X X X X
2660VT with TruSet Tillage Controller 1 (TC1) 3.03K12 X X X X
2430 with TruSet Tillage Controller 1 (TC1) 2.14K4 X X X X
2510H with TruSet Tillage Controller 1 (TC1) 2.85K5 X X X X

*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 radar speed kit.

John Deere Round Balers

John Deere Round Balers Control unit name Software version (or newer) CommandCenter Universal Display
4600 v2 4200 4640 4240
0 Series Baler Automation 10.07 X X X X
9 Series Premium
Baler Automation 7.16 X X X X
V451R/V461R  Baler Automation 11.5 X X X X

 

 

John Deere Large Square Balers

John Deere Large Square Balers
Including Harvest Tec applicator and PhiBer accumulator
Control unit name Software version (or newer) CommandCenter  Universal Display
4600 v2 4200 4640 4240
0 Series Gen 4 VT 3.04 X X X X
1 Series
Gen 4 VT 5.07 X X X X
Precision Ag Technology software compatibility
John Deere control units Control unit name Software version (or newer) CommandCenter Universal Display
4600 v2 4200 4640 4240
*StarFire 6000 Receiver --- 4.50P X X X X
StarFire 6000 Integrated Receiver --- 4.50P X X X X
StarFire 3000 Receiver --- 2.80S X X X X
*Modular Telematics Gateways (MTG) - 3G --- 21.03 X X X X
*MTG - 4G --- 27.01.541 X X X X
GreenStar Rate Controller --- 3.70K X X X X
GreenStar Rate Controller Dry --- 2.11A X X X X
*John Deere Rate Controller 2000 --- 1.13A X X X X
*AutoTrac Universal 200 --- 2.30A --- --- X X
*AutoTrac Universal 300 --- 3.24L --- --- X X
AutoTrac Controller 300 --- 3.24L --- --- X X
AutoTrac Controller 250 --- 11933B --- --- X X
*AutoTrac Controller - Deere --- 1.11B --- --- X X
AutoTrac Controller - Raven --- 10.13.909-158 --- --- X X
AutoTrac Controller - Reichhardt® --- SW 1.3 --- --- X X
AutoTrac RowSense RG3 AKK15783H X --- X ---
AutoTrac Vision VGC 4.01V X --- X ---
AutoPath™ --- 20-3 X --- X ---
AutoTrac Turn Automation --- 19-3 X --- X ---
AutoTrac Implement Guidance --- 19-3 X --- X ---
Machine Sync --- 20-3 X --- X ---
Active Implement Guidance (VT) Application Controller 1100 2.71Z X X X X
Application Controller 1100 (serial number PCXL01C201000-) 3.17Q X X X X
iGrade™  Application 1100 2.71Z X X X X
Application Controller 1100 (serial number PCXL01C201000-) 3.17Q X X X X
Distance Trip  Application 1100 2.71Z X* X X X
Application Controller 1100 (serial number PCXL01C201000-) 3.17Q X* X X X
Yield Documentation, Specialty Crop  Application Controller 1120 1.51Y X X X X
Application Controller 1120 (serial number PCXL02C201000-) 3.17Q X X X X
Mobile Weather Application Controller 1120 1.51Y X X* X X*
Application Controller 1120 (serial number PCXL02C201000-) 3.17Q X X* X X*
Harvest Identification, Cotton Application Controller 1120 1.51Y --- --- X ---
Application Controller 1120 (serial number PCXL02C201000-) 3.17Q --- --- X ---
Gen 4 Extended Monitor     X --- X ---
Wireless Data Server Wireless Data Server

1.591.2 (Planting)
7.564.1
(Application)
2.573.1
(Harvesting)

X --- X ---
Mobile Data Transfer MyTransfer™ app

3.8.6 (iOS®)
3.8.5 (Android™)

X X X X
Connect Mobile app Connect Mobile app 8.4.0 or newer X --- X ---
Connect Mobile server Connect Mobile server 2.3.113-1 X --- X ---
Manure Constituent Sensing Manure Controller 19.06 X --- X ---

*NOTE: See additional information below.

StarFire Receivers

StarFire Receivers can be updated in the following ways:

  • Receiver USB port (available only for StarFire 6000 Receivers)
  • Generation 4 display USB port
  • Remote software updates application (in ISOBUS VT app)


John Deere Operations Center

To use RDA on a Generation 4 CommandCenter Display with a GreenStar 3 2630 Display connected in the same machine, GreenStar 3 2630 software version 3.22.1095 (SU2014-1) or higher is required (for 4600 CommandCenter Display and 4640 Universal Display only).

GreenStar Rate Controller Dry

GreenStar Rate Controller Dry (GDC) 2.11A was the last software version available through Software Manager. GDC 2.20A has been available since spring 2015 and contains diagnostic language updates. This software can only be obtained through Service ADVISOR.

John Deere Rate Controller 2000

The John Deere Rate Controller 2000 will not control the planter clutches or half-, third-, or quarter-width disconnects on a John Deere planter.

AutoTrac Vision

AutoTrac Vision Guidance is only compatible with Generation 4 18-1 software 10.10.404-345 or newer. 


ISOBUS implements

Generation 4 displays support two Agricultural Industry Electronics Foundation (AEF) certified ISOBUS control units. The use of two ISOBUS control units is limited to the configuration of one front and one rear implement. The use of multiple ISOBUS control units as rear implements is not supported. Generation 4 displays support AEF-certified ISOBUS implements with Task Controller Section Control (TC-SC) functionality and AEF certification for TC-SC include sprayers, fertilizer spreaders, planters, seeders, manure applicators, etc. For third-party FMIS compatibility, reference the John Deere Operations Center.

A software update performed by an authorized ISOBUS implement dealer may be required to obtain compatible software. ISOBUS implements must be certified through the Agricultural Industry Electronics Foundation (AEF) to be recognized by the Generation 4 CommandCenter Display. Visit www.aef-online.org for more information; visit www.aef-isobus-database.org for an active list of compatible implements.

ISOBUS implements with VT4 are now supported by Generation 4 displays. Generation 4 displays still support older VT versions (example: VT2 and VT3). If an implement is not loading after updating to Generation 4 software update 2017-2 (or newer on 4600 CommandCenter v2 processors), it is recommended that the implement manufacturer be contacted to get a software version that is either VT3 or VT4.

Implements without controllers

Implements without controllers can be documented as a stand-alone operation or with a rate controller from John Deere. Additionally, multiple implements without controllers cannot be documented together.

AutoPath

AutoPath is compatible with 4600 CommandCenter (v2 server) and 4640 Universal Displays running 20-3 or later software.

AutoPath requires specific source operation data (including an implement receiver) gathered during the first field operation of the year.

For more information on AutoPath functionality and requirements, refer to the Sales Manual.


AutoTrac Implement Guidance (passive)

  • AutoTrac Implement Guidance is compatible with SeedStar 4HP, SeedStar 3 HP, SeedStar 2, and SeedStar XP.
  • AutoTrac Implement Guidance is compatible 1990CCS Seeders as well as 1910, C650, and C850 Tow-Behind Air Carts.
  • AutoTrac Implement Guidance is NOT compatible with N500C seeding tools and tow-between air carts.
  • For more information on AutoTrac Implement Guidance, refer to the Sales Manual.

AutoTrac Turn Automation

To use the AutoTrac Turn Automation application, specific compatibility is required. AutoTrac Turn Automation is compatible with the following machines:

  • 8030 Series Tractors
  • 9030 Series Tractors (if equipped with PowerShift™ transmission)
  • Model year 2012 and newer 6R Tractors (if equipped with Infinitely Variable Transmission [IVT™] and ITEC™ functionality)
  • Model year 2011 and newer 7R Tractors (if equipped with CommandQuad™ transmission, e23™ PowerShift transmission, or IVT)
  • Model year 2010 and newer 8R/RT Tractors
  • Model year 2012 and newer 9R/RT/RX Tractors

NOTE: Integrated tractor IMS must be turned off on 30 Series Tractors to use AutoTrac Turn Automation on the Generation 4. Integrated Tractor iTEC must be turned off on the following tractors to use AutoTrac Turn Automation on the Generation 4:

  • Model year 2012-2014 6R
  • Model year 2011-2013 7R
  • Model year 2010-2013 8R
  • Model year 2012-2014 9R

NOTE: If instead an operator chooses to use the machine’s integrated IMS/iTEC functionality, then AutoTrac Turn Automation and iTEC must be turned off in the Generation 4 Universal Display.

AutoTrac Turn Automation is compatible with SeedStar 4 HP, SeedStar 3 HP, SeedStar 2, and SeedStar XP planters, 1990CCS Seeders, and 1910, C650, and C850 Tow-Behind Air Carts.

AutoTrac Turn Automation is compatible with N500C Series Air Tools with selective control valves (SCVs) operating in manual mode. See the "Additional Information" section of DTAC solution 115995 for more information.

AutoTrac Turn Automation is NOT compatible with the following implements and implement configurations:

  • Front-mounted implements
  • Tow-between air carts
  • Multiple implements pulled in series where the work piece is not connected directly to the tractor

 

For more information on AutoTrac Turn Automation, refer to the Sales Manual.

 

Machine Sync

Supported leader platforms

  • Combine:
    • X Series Combines, S Series Combines, W Series Combines, T Series Combines, 70/60/50 Series Combines
  • Self-Propelled Forage Harvesters
    • 9000 Series and 8000 Series
  • John Deere Tractors
    • John Deere tractors with Gen 4 4600 CommandCenter Displays and John Deere tractors compatible with the Gen 4 4640 Universal Display

Supported follower platforms

  • John Deere tractors (wheeled models)
    • 6R Tractors with Infinitely Variable Transmission (IVT™) (iTEC™ functionality required)
    • 7R Tractors with CommandQuad™ Eco transmission, e23™ transmission, and IVT
    • 8030 Tractors with PowerShift™ transmission and IVT
    • 8R Tractors with PowerShift, IVT, and e23 transmission
    • 9030 Tractors with PowerShift transmission
    • 9R Tractors with PowerShift transmission with Efficiency Manager™ feature
  • John Deere tractors (tracked models)
    • 8RT/8RX Tractors with PowerShift, IVT, and e23 transmission
    • 9RT/9RX Tractors with PowerShift transmission with Efficiency Manager feature
  • NOTE: John Deere 8030T and 9030T models are not compatible with Machine Sync.

Reprogramming Application Controllers 1100 and 1120

4600 CommandCenter v1 does not support reprogramming on the UCC2 version of Application Controller 1100 and 1120. Service ADVISOR or compatible displays may be used.

Distance Trip documentation/Yield Documentation, Specialty Crop

A UCC2 Application Controller 1100 with 19-2 software or newer, running on a 4600 CommandCenter v2 server enables documentation of field operations. If a UCC2 replaces a UCC1 Application Controller 1100 on a CommandCenter v1 server, documentation is not available.

Camera compatibility

Voyager® cameras are supported on Generation 4 displays. All other camera types are not supported.

Non-John Deere Precision Ag

4600 CommandCenter v2 and the 4640 Universal Display are compatible with the following RS-232 configurations with software update 18-2 and newer:

  • Global positioning system (GPS) receivers with serial port connection
    • Will not enable AutoTrac guidance functionality
  • Raven RS-232 control units (440, 450, or 660) on tractors configured as implement-based applications
  • Generation 4 displays are not compatible with the DN345 Drawn Dry Spreader at this time.

4600 CommandCenter v2 and the 4640 Universal Display are compatible with the following RS-232 configurations with software update 20-3 and newer:

  • Yara N-Sensor
  • Fritzmeier
  • Trimble® GreenSeeker®
  • LH 5000

Machine Communication Radio (MCR)

Generation 4 displays are not compatible with MCR.

APEX™ software

  • Generation 4 display work data is not compatible with and cannot be viewed in APEX software.
  • USB files including pre-assigned APEX tasks and iTEC Pro sequences will not import into Generation 4 displays.

NOTE: Gen 4 data is only compatible with the John Deere Operations Center. All Gen 4 activations are machine specific and cannot be transferred to a different machine. If not using WDT, an 8- to 32-GB USB is required to transfer data to and from the Gen 4 display. Implement settings are display specific and cannot be imported or exported from the Gen 4 display.

RAM is a trademark of National Products Inc. Montag is a trademark of Montag Manufacturing, Inc. Hagie is a trademark of Hagie Manufacturing Company and similar to John Deere branded equipment, John Deere will support Hagie equipment. Reichhardt is a trademark of Reichhardt GmbH Steuerungstechnik. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC. Voyager is a trademark of ASA Electronics, LLC. Trimble and GreenSeeker are trademarks of Trimble, Inc.

Sorry, currently there are no specs but check back with us later.