- On Sale
- Build Your Own
- Used Equipment
- New John Deere Equipment
- Trade In
- Parts
- Service
- Order Parts Online
- Equipment Sales
- Precision Farming
-
- The Basics Of Haymaking
- Round Baler Basics for a 460M Round Baler
- How to Load Net Wrap on a 460M Round Baler
- Top 10 Implements For Livestock Operations
- How to store large round bales
- How to set up and operate a mower conditioner
- How to use a mechanical grapple
- Pick up grass clippings using a drive-over mower deck
- PRO Values
- Careers
Brillion WLB-3631-30
Features
- Three-Section Folding Models in 25’, 30’ and 36′ Working Widths
- Designed for Improved Residue Flow Through the Machine
- Three Rows of Shanks on Overall 6” Spacing
- Two-Piece Edge Bent S-Tine Shanks for Better Leveling
- 23” Under Frame Clearance
- 18” Between Shanks, Minimum of 24” Between Rows
- 2” Reversible Points
- Maximum Shank Operating Depth of 5”
- Two-Row Coil Tine Harrow in Front of Rear Roller
- 8” Roller Axles
- 61mm Heavy-Duty Bearings
- 24” Notched Ductile Iron Wheels
- Rear Scrapers Standard on Notched Rollers
- From Transport Hitch Floats 25 Degrees Up and 17 Degrees Down
- Wings Float 6 Degrees Down
- Single Point Depth Control
- Wing Hydraulic Down Pressure
- Dual Transport Wheels
- (4) 320/70R15 Tires on 25’ Model
- (4) 380/55R X 16.5 Tires on 30’ Model
- (4) 480/45R17 Tires on 36′ Model
- Cat. III, IV or V Hitch
- Transport Height – 9’6” for 25′ and 30′ Model; 13’8″ for 36′ Model
- Transport Width – 14’8” for 25’ Model; 17’ for 30’ Model; 18’10” for 36′ Model
- LED Warning Lights and SMV Emblem
- Safety Chain Kit
- Powder Coat Paint
| Model | WLB-3631-30 |
| Approximate Weight | 27,870 lbs. (12,642 kg) |
| Working Width | 30 ft. (9.1 m) |
| Transport Width | 17 ft. (5.2 m) |
| Transport Height | 9 ft. 6 in. (2.9 m) |
| Overall Length (Transport) | 29 ft. (8.8 m) |
| Road Clearance | 15 in. (381 mm) |
| Type of Pulverizer Wheel - Front | 24 in. (609.6 mm) Notched Ductile Iron |
| Number of Pulverizer Wheels - Front | 92 |
| Type of Pulverizer Wheel - Rear | 24 in. (609.6 mm) Notched Ductile Iron |
| Number of Pulverizer Wheels - Rear | 92 |
| Rear Roller Scrapers | Standard |
| Roller Axle Size | 8 in. (203 mm) |
| Bearing Type | 61 mm Heavy-Duty |
| Type of Shanks | Heavy-Duty Two-Piece Edge Bent S-Tine Shank 1.75 in. x 0.625 in. (44.5 x 15.9 mm) |
| Number of Shanks | 59 |
| Nominal Shank Spacing | 6 in. (152 mm) |
| Maximum Shank Depth of Operation | 5 in. (127 mm) |
| Under Frame Clearance | 23 in. (584 mm) |
| Hitch | Pull-Type with Hydraulic Lift |
| Hitch Category | Cat. III, IV or V |
| Tire Size | (4) 380/55R x 16.5 |
| Hydraulic Circuits Required | 3 + Case Drain (+1 for Rear Hitch) |
| Wing Hydraulic Down Pressure | Standard |
| Hydraulic Tooth Control | Single Point Depth Control |
| Two-Row Coil Tine Harrow | Standard |
| Rear Hitch | Optional |
| Front Roller Scraper Kit | Optional |
| Land Leveler Kit | Optional |
| V-Leveler Kit | Optional |
| Rear Three Row Coil Tine Harrow Kit | Optional |
| LED Warning Lights & SMV Emblem | Standard |
| Safety Chain Kit | Standard |
| Powder Coat Paint | Standard |
| Horsepower Requirements | 10 to 12 HP (7.5 to 8.9 kW) per ft. |
| Recommended Operating Speed | 6 to 8 MPH (10 to 13 km/h) |