| Capacity (no capacity extension) | 520 ft3 (14.7 m3) |
| 6 in capacity extension | 574 ft3 (16.3 m3) |
| 12 in capacity extension | 628 ft3 (17.8 m3) |
| 18 in capacity extension | 682in(208cm) ft3 (19.3 m3) |
| Number of Auger | 2 |
| Dimensions |
| Length (A) | 242 in (6.15 m) |
| Height (B) no extension | 102 in (2.59in(150cm) m) |
| 6 in capacity extension | 108 in (2.74 m) |
| 12 in capacity extension | 114 in (2.9 m) |
| 18 in capacity extension | 120 in (3.05 m) |
| Hay retention ring (additionnal height) | 0 in / 3,5 in |
| Width (C) | |
| Without incline conveyor | 101 in (2.57 m) |
| With incline conveyor (retracted) | 115 in (2.92 m) |
| Incline conveyor operating angle (degrees) | 226 @39 degrees |
| Outside width of the wheels | 99 in (2.51 m) |
| Lateral distance to discharge point (D) | |
| Incline conveyor chain / belt 3 ft at min.26 angle /max 40 | 29-22in at 26º / 27-20in at 40º |
| Incline conveyor chain / belt 4 ft at min. 26 angle /max 40 | 38-42in at 26º / 51-51in at 40º |
| Incline conveyor chain / belt 5 ft at min. 26 angle /max 40 | 44-48in at 26º / 61-61in at 40º |
| Incline conveyor chain / belt 6 ft at min. 26 angle /max 40 | 48-52in at 26º / 67-67in at 40º |
| Incline conveyor chain / belt 7 ft at min. 26 angle /max 40 | 54-58in at 26º / 77-77in at 40º |
| Incline conveyor chain / belt 8 ft at min. 26 angle /max 40 | 58-62in at 26º / 84-84in at 40º |
| Discharge height (E) | |
| Incline conveyor chain / belt 3 ft at min. 26 angle /max 40 | 34-38in at 26º / 44-44in at 40º |
| Floor ST (E1) / Conveyor FD (E2) to ground | 34 in (0.85 m) |
| Specifications |
| PTO shaft - Standard specification | 540 RPM 1" 3/8 Z6 |
| PTO shaft - Option specification | 1000 RP m 1" 3/8 Z21 |
| 2 speed Gear Box | Optional |
| 2 Speed Gear Box and ratio | C3A-R, 1;1,5 54in(888cm)0 RPM C3A-R, 1,8;2,7 1000 RPM |
| Minimum PTO HP Requirement - Low Speed | 80 |
| Minimum PTO HP Requirement - High Speed | 120 |
| Auger RPM - Low Speed | 27 RPM |
| Auger RPM - Standard High speed | 41 RPM |
| Standard planetary model and ratio configuration | 1602 @13.4 |
| Optionnal Planetary | N/A |
| Floor Thickness (AR235 grade or equivalent) | 5/8 in |
| Sidewall Thickness (AR235 grade or equivalent) | 1/4 in |
| Flighting Thickness (AR235 grade or equivalent) | 5/8 in |
| Standard knives per auger | 6 / 10 optional |
| Driveline security | Shear bolt |
| Hydraulic flow requirement | 10-15 US gal/ m in 37-56 L/ m in |
| Hydraulic pressure | 160-200 bar (2300-2900 psi) |
| Load cell | 3 |
| Scale system | DG500 (standard) |
| Machine Weight (empty) - STD configuration | 11 744 lb (5326 kg) |
| Utility load capacity | 15 080 lb (6839 kg) |
| Axle - Standard specifications | Single |
| Axle - Optional specifications | N/A |
| Wheels - Standard specifications | 385/65R22.5-20 |
