Unverferth 1120
Features
Auger
- Dual-auger design features a 24" diameter lift auger and 20" floor auger on model 2020 and a 22" lift auger combined with a 20" floor auger on models 1610, 1310 and 1110 for complete cleanout, even in high-moisture grain
- Model 2020 unloads 1,000 bushels per minute
- Models 1610, 1310 and 1110 unload 840 bushels per minute
- Model 2020 features a pivoting lift auger which provides more than 5' of height adjustability so the operator can lower the auger to the truck when unloading and raise the auger when pulling away
- Dual-folding positions allow the lift auger to be completely lower for road transport and a convenient in-field transport position with easy-to-use stand shortens the time to fold the auger back into the unloading position
- Dual four-strand belt drive with independent idlers power the high-output floor auger that feeds the lift auger
- Multi-directional downspout provides in-and-out movement for easily loading and topping off of trucks and wagons
- Dual auger-mounted halogen spotlights for easier nighttime unloading
Grain Tank
- 2000, 1600, 1300 and 1100 bushel capacity tanks with a tubular-steel mainframe, graphite coated interior and 12-gauge steel shell for increased durability
- Narrow transport width for safer road travel and a load side height of less than 11' 6" for increased combine clearance
- Standard transport safety chain, L.E.D. tail and flashing lights and reflective striping for added on added trasnport visibility
- PTO features a slip clutch for superior component protection
- Pivoting hose and electric receptacle holder keeps hoses up and out of the way
- Hoses are color coded for quick and precise hookup
- Weather Guard rollover tarp with trailer-type latching mechanism protects harvested crop from inclement weather
- For complete cart cleanout, hinged floor access gates are standard
In-Line Tandems
- Available on model 2020
- Features a walk-over design for following ground contours and 12-bolt hubs for maximum strength
High-Flotation Singles
- Available on models 1310 and 1110
- Tractor lug design on model 1310 and tractor lug or diamond tread design on model 1110
Walking Tandem Duals
- Available on models 1310 and 1110
- Innovative design allows the cart to trail easily through the field and features independent operation from front to rear, allowing the cart to "walk" over obstacles.
- Can be adjusted for 30" or 36" row spacings and the entire wheel assembly swings out for easier tire/wheel maintenance
Equalizer™ Track Systems
- 42" wide track belt provides the widest footprint in the industry!
- Patented design features 8° of side-to-side camber and 20° of front-to-back pivot with independent movement of each track to provide uniform ground contact on uneven terrain - for optimum flotation
- Available on models 2020, 1610 and 1310:
- 42" wide rubber track with 105" of ground contact length provides the largest footprint in the industry, over 60 square feet!
- Four cast pivoting midrollers are on the same plane as the main idler wheels for optimum flotation
- Available on models 1310 and 1110:
- 42" wide rubber track with 87" of ground contact length provides a footprint of over 50 square feet
- Two cast pivoting midrollers are on the same plane as the main idler wheels for optimum flotation
- Shallow belt tread design for greater flotation and traction
- 40" main idler wheels feature 10-bolt hubs for added durability
- All hubs are greaseable and feature triple-lip seals with a steel guard for optimum lubrication
- Hydraulic belt tensioning adjustment for easier track alignment, optimum ground contact and even weight distribution
- Standard auto-greaser system for automatic application at more frequent intervals for consistent lubrication
Tracked Undercarriage
- 40" main idler wheels feature 10-bolt hubs for added durability
- All hubs are greaseable and feature triple-lip seals with a steel guard for optimum lubrication
- Hydraulic belt tensioning adjustment for easier track alignment, optimum ground contact and even weight distribution
- Available on models 2020, 1610 and 1310:
- 36" wide rubber track with 105" of ground contact length
- Four cast pivoting midrollers are on the same plane as the main idler wheels for optimum flotation
- Available on models 1310 and 1110:
- 36" wide rubber track with 90" of ground contact length
- Two cast pivoting midrollers are on the same plane as the main idler wheels for optimum flotation
Model | 1120 |
Capacity (bushels) | 1,100 |
Engine H.P. | 225+ |
Loaded Tongue Weight (lbs) | 5200 |
Empty Tongue Weight (lbs) | 3400 |
Auger Diameters (vertical/horizontal) | 22" / 20" |
Unload Speed (bu./minute). | 850 |
Flighting Thickness | 7/16" |
Hub Size / Spindle Diameter | 10-bolt / 4 1/2" |
Hydraulic Remotes Required | 4 |
Hopper Length | 22' |
Hopper Width | 11' 10" |
Auger Side Reach Max measured to inside edge of spout |
9' 1" |
Auger Side Reach Min measured to inside edge of spout |
3' 4" |
Overall Transport Length | 30' 10" |
Hitch to Center of Axle | 20' 4" Single 19' 3" Front Tandem |
Single Wheels and Tires | |
Measured Undercarriage | 1050/50x32 Tire |
Empty Weight (lbs) | 18960 |
Hitch Height | 1' 8" |
Hopper Height Low Side | 10' 9" |
Hopper Height High Side | 11' 9" |
Auger Height with Spout Straight Down | Adj. 15' 3" - 10' 3" |
Height to Top of Auger in Unload Position | Adj. 20' 6" - 15' 6" |
Width Outside of Tires | 13' 3" |
Center of Tire to Center of Tire | 10' |
Under Frame Clearance | 1' 4" |
Walking Tandem Dual Wheels and Tires | |
Measured Undercarriage | 520/85x38 Tires |
Empty Weight (lbs) | 22780 |
Hitch Height | 1' 8" |
Hopper Height Low Side | 10' 7" |
Hopper Height High Side | 11' 6" |
Auger Height with Spout Straight Down | Adj. 15' 3" - 10' 3" |
Height to Top of Auger in Unload Position | Adj. 20' 6" - 15' 6" |
Width Outside of Tires | 13' 10" |
Center of Tire to Center of Tire Inner Dual | 6' 2" |
Under Frame Clearance | 1' 7" |
Center of Tire to Center of Tire Outer Dual | 12' 7" |
Hitch to Center of Tire Rear Dual | 21' 4" |
Tracks | |
Measured Undercarriage | 36"x131" Tracks |
Empty Weight (lbs) | 25520 |
Hitch Height | 1' 4" |
Hopper Height Low Side | 10' 4" |
Hopper Height High Side | 11' 4" |
Auger Height with Spout Straight Down | Adj. 15' - 10' |
Height to Top of Auger in Unload Position | Adj. 20' 10" - 16' 1" |
Width Outside of Tracks | 12' 1" |
Center of Track to Center of Track | 9' 1" |
Under Frame Clearance | 11" |
Bushel capacities were measured with #2 corn at 15% moisture (56 lb test weight) | |
Due to continuing improvements in the design and manufacture of Unverferth products, all specifications contained herein are subject to change without notice. |
|
Loaded Tire Ground PSI Chart | |
Undercarriage | Model 1120 |
42"x131" Equalizer Tracks | 11.47 |
36"x148" Traditional Tracks | 11.09 |
36"x131" Traditional Tracks | 13.11 |
36"x112" Economical Tracks | 14.66 |
520/85x38 Walking Tandem Duals (155A8 LI) | 20.92 |
520/85x38 Walking Tandem Duals (173A8 LI) | 25.56 |
520/85x42 Walking Tandem Duals (165A8 LI) | 18.68 |
650/65x42 Walking Tandem Duals (168A8 LI) | 18.64 |
IF 1250/50x32 (201A8 LI) | 14.6 |
1250/50x32 Singles (188A8 LI) | 16.96 |
1050/50x32 Singles (178A8 LI) | 21.25 |
35.5x32 Singles (193A8 LI) | 26.41 |
Loaded Tire Ground Pressure - P.S.I. calculated at the 3" penetration level. | |
For use as a comparative guide in choosing between various tire options. |