- On Sale
- Build Your Own
- Used Equipment
- New John Deere Equipment
- Trade In
- Parts
- Service
- Order Parts Online
- Equipment Sales
- Precision Farming
-
- The Basics Of Haymaking
- Round Baler Basics for a 460M Round Baler
- How to Load Net Wrap on a 460M Round Baler
- Top 10 Implements For Livestock Operations
- How to store large round bales
- How to set up and operate a mower conditioner
- How to use a mechanical grapple
- Pick up grass clippings using a drive-over mower deck
- PRO Values
- Careers
Meyer Farm Equipment V-Force 7400 Trailer
Features
- Pull Type or Truck Mount models available
- Meyer patented straight-line flow - provides the ultimate spread performance. Better pattern, faster unload time, less horsepower & minimal wind drift!
- Rear Unload Rules! When it comes to spreading, keep the mess behind you. Provides superior application too.
- 3 auger system, only one of its kind! Lower 20" augers feed the door while the upper 13" auger levels the load forward and eliminates bridging.
- Thanks to the dual lower auger arrangement, the Meyer spreader body is wide down low. This means we can maintain a lower load height with maximum capacity!
- independent Lower Auger Shear Bolt Protection, a Meyer exclussive. Allows you to protect an obstructed auger while still unloading a majority of the load with the other auger. Bound to save you work!
- Heavy Duty Drivetrain - V-Force models feature #120 final drive chains #80 expeller and first reduction. HD jackshafts / spring chain tensioning / remote greasing on hard to reach spots!
- Automatic Roller Chain Oiler is standard. Oils all roller chains each time you cycle the tailgate. Eliminates reduced access and manure contamination associated with oil bath systems.
- Sectionally Flighted 20" Lower Augers propel material to the rear of the spreader. Full auger flighting / No Paddles to wrap, freeze or wedge material
- Our Revolutionary T-Post auger hold-down retains a nylatron (non maintenance) bushing and maintains tight auger tollerance to the tank floor. Provides you more complete cleanout!
- Vertical Twin Expellers pulverize material for smooth, even application. This machine bands material across the back like a ferilizer spreader would, unlike side delivery units that attempt to chuck all the product out one side. Paddles are replacable and reversible!
- Check out this Shock Load Coupler System....Drastically reduces "shock/stress" related to rocks and frozen material to your drivetrain. This dampening system combined with a torque disconnect clutch protect your expeller drive sytem.
- Direct shaft drive expellers (includes our shock load coupler). No chains on the rear of this spreader. V-Force models feature an overrunning clutch system to reduce backlash on the drivetrain.
- 540 CV PTO is standard - 1000 CV PTO is optional. Both incorporate a torque disconnect clutch to protect your investment.
- All Meyer spreaders feature a full channel frame. Stress from the hitch, axles and body are transmitted throught the frame network. Take a look at the unibody design on most V-Spreaders.
- Standard Hitch / Optional Hitch
The 7400 Model features a standard V-Hitch / the 7500 Model comes standard the long hitch package. (7500 pictured here with long hitch) - HD Axle System
This HD, offset A-Frame tandem on the V-Force models features 3" spindles on a 7500 (2 3/4" spindles on 7400) - both are 8 bolt. 10 bolt hub/spindle option available on 7500 model. - Many tire options available including rib implement tires and used truck tires.
- Angle splash shields standard front and rear on 7500; Elevated front splash shield and flat rear splash shield on 7400 model.
- LED turn signal lighting standard / Center Lift Door
- The center lift door system eliminates arms and linkages - it is standard on the 7500 model
- Hydraulic Lid Option
- This Hydraulic Lid feature provides cleaner transportation and less odor pollution. Right or Left hinge available and a port hole is standard equipment. (7500 only)
- Extension Package
This 4" side extension is available for the 7400. It increase it's capacity to 465 bushel or 2,150 gallons. - Scale Package
The 7500 Model is available with a 5 point scale package. Basic or Nutrient Tracker versions available.
| MODEL | V-Force 7400 Trailer |
| CAPACITY | |
| Bushels Heaped | 400 |
| Gallons/Cu.Ft. (struck) | 1,870 / 250 |
| Cu. yards (struck) | 9.26 cu. yards |
| DIMENSIONS | |
| Overall Length | 21' 9" |
| Inside Tank Length | 15' |
| Loading Height | 66" w/14Lx16.1 67.5" w/16.5Lx16.1 |
| Overall Height- | 73.25" (front) 14L |
| -Top of Splash Guard | 74.75 (front) 16.5L |
| Overall Width (outside tires) | 95.75" w/14Lx16.1 102.75" w/16.5L |
| Top Tank Width | 77 3/4" |
| SPECIFICATIONS | |
| Total Weight | 8,040# w/14L |
| Max. Net Load (Lbs.) | 16,000# |
| Auger Diameter (lower) | 20" - 3/8" sectional |
| Ind. Lower Auger Shear Hub Sprockets | Optional |
| 3rd Auger (solid material) | Standard |
| Drive - PTO RPM | 540 RPM with constant velocity |
| Drive Line Protection | Overrunning torque disconnect clutch |
| Roller Chain Drive - augers - expellers |
#80 - #120 #80 |
| Roller Chain Auto Oiler | Standard |
| Expellor Speed (RPM) | 660 RPM |
| Expellor Diameter | 22" |
| TANK CONSTRUCTION | |
| Construction | Copper bearing |
| Material | steel |
| Thickness - Tank Sides | 3/16" |
| Thickness - Front/Back | 3/16" |
| Frame Construction | Heavy 8" channel |
| Door Opening | 27" x 42" |
| Spindle Diameter - tandem axle | 2 3/14" |
| Hub | 8 Bolt |
| Splash Shields - front & rear | Standard - flat (low clearance) |
| Transport Lights | Standard w/ag cord |
| Tractor Req. PTO HP (min) | 85 HP |
| OPTIONS | |
| Lower Auger Shear Hubs | Optional |
| 1000 RPM Kit | Optional |
| 19" Longer Hitch (for dual wheeled tractor) |
Optional |
| Hydraulic Controled Lid | Optional |
| Poultry Litter Package | Optional |
| Safety Chain | Optional |
| Truck Mt. Drive Options | Optional |