Kuhn MM 1100
IT STARTS WITH THE PICKUP
High-Capacity Pickups with Integrated Frames
Commercially designed pickups treat crop gently, yet are built and tested for extreme use. Chrome-moly tine bars greatly improve strength and wearing characteristics. The dual-cam design, with heavy-duty, sealed cam followers, provides extra-long life even in the toughest conditions. KUHN high-capacity pickups are designed and built with integrated frames to improve the strength and durability. The pickups keep the machine looking clean since there is no place for crop to catch and build up.
Heavy-Duty Belt Conveyors
Commercial-grade belt conveyors allow the crop to be effectively transitioned into the windrow, regardless of discharge side. The conveyor belt is self-cleaning and requires no tracking adjustments. Each conveyor has an easy-to-access splice for fast removal or replacement, if necessary due to maintenance and normal wear.
A quick-release belt tensioning system simplifies storage and routine adjustment. Easy adjustment from one side maintains uniform pressure over the width of the belt. It is recommended to take the tension off of the belts in between cuttings and during the off season.
Floating Windguard and Standard Crop Netting
The floating windguard eliminates the need to make adjustments when merging different crops or cuttings. The simple geometry of the floating linkage means the windguard is automatically optimized for differing volumes of crop. The long, curved guiding fingers provide excellent crop guidance onto the center of the belt for fluffy and even windrow creation.
Standard crop netting greatly limits leaf loss during transition to the belt and ultimately improves leaf incorporation in the windrow. You can adjust the netting from being fully extended to halfway to match your needs.
Belts and pickups are driven using the onboard hydraulic pumps with hydraulic oil from a 67-gallon reservoir. This large capacity reservoir ensures that cool oil is always being circulated through the system. The massive reservoir surface area and specially designed system provides excellent cooling in even the hottest conditions, without the need for an oil cooler. A sight gauge is provided on the side of the tongue to quickly check oil levels.
The hydraulic drive pumps oil through the main hydraulic block to run all the functions of the machine, including the pickup speed, belt direction and pickup height. All of these functions are electronically controlled via the tractor’s ISOBUS terminal, or the optional CCI 50 or CCI 1200 ISOBUS terminals. Each section of the hydraulic block controls one pickup head and is easily accessible from the rear of the machine.
To minimize wrapping in long crops, such as oats or long grasses, patented HDPE anti-wrapping discs are installed at the ends of the pickups and rotate with the tine bars. This small improvement reduces dead space, where long crop likes to wrap, as seen with all pickup-style mergers.
VERSATILE AND ADAPTABLE
Versatile and Adaptable to Your Environment
Multiple Delivery Options
The MM 1100 and MM 1300 can merge crop to the left, right, split or with either wing in the raised position. Having the ability to raise the wings independently is particularly useful for opening up fields, merging around obstacles or cleaning up point rows in irregularly shaped fields.
Narrow & Simple Transport
The simple folding design allows quick transition from field to road. Transport is a narrow 12’1” wide. Balanced tongue weight during transport and in the field helps you maintain control at all times. At 10 GPM of hydraulic flow, field to transport position is possible in approximately 12 seconds.
No Steering Axle Required
The MM 1100 and MM 1300 do not require a steering axle, even on steep hillsides. This is a result of its short wheelbase and is an advantage over competitive mergers. This simplification reduces routine maintenance and improves overall reliability. An added benefit of the short wheelbase is reduced tongue weight, so the tractor does not get “pushed around” by the merger.
Constant Float® Suspension
A simple and effective mechanical spring suspension system is utilized for superior float characteristics. This unique design, inspired by the proven KUHN trailed mower, eliminates complicated hydraulic requirements and the need for tractor float valve engagement, unlike other mergers in the industry.
Floating Skid Shoes
Dual, wide skid shoes allow each head to rapidly adapt to undulating field conditions while maintaining very low ground pressure. Floating skid shoes are a KUHN exclusive. The pivoting action allows the pickups to float over pivot tracks and rough terrain. Additionally, the special shape and pivoting of the shoe allow for self-cleaning when lifted into headland position to eliminate crop buildup. The skid shoes are reversible on their mounts for even wear and longer life.
TIME SAVING FEATURES
The specially designed 2-point hitch makes hookup quick and easy. The swiveling headstock eliminates driveline chatter and allows up to 90-degree turns. The hitch is Cat. 3/4/4N quick hitch compatible. An integrated dual stand provides a large footprint and swings and locks easily when attached to the tractor.
Both mergers require very little maintenance for their size. A centralized greasing system is standard on the machine, where one grease point is used to grease the entire machine. To save even more time, an optional auto-lube grease pump can be installed.
Bearing Wear Sleeves
Exclusive in the industry, standard bearing wear sleeves maximize tine bar life by providing an easily replaceable split mounting surface. If you’re merging in abrasive soils, you’ll especially appreciate this feature as a wear guard can easily be replaced, with the tine bar installed in under one minute.
Split Bearing Design
The two-piece, poly tine-bar bearing greatly simplifies periodic maintenance. Its design allows you to replace the bearing in under one minute, unlike competitive machines which require you to remove tine bars and tines to replace worn bearings. Additionally, a specially formulated bearing material maximizes bearing life and minimizes friction.
|Pickup working width||36' (11 m)|
|Number of pickups and conveyors||3|
|Individual pickup width||12' (3.7 m)|
|Conveyor length||11'10" (3.6 m)|
|Conveyor width||3' (1 m)|
|Discharge capability||Right, left, or split|
|Adjustable crop nets||Standard|
|Number of tine bars||6|
|Cam followers||Sealed roller bearings|
|Pickup height||5/8" - 3 1/8" (1.6 - 7.9 cm)|
|Adjustable skid shoes||Hydraulic|
|Header flotation||Constant float® suspension|
|Header suspension travel||14" (+8", -6") (35.6 cm (+20.3 cm, -15.2 cm))|
|Hitch||2-point swivel, Cat. 3/4N/4, quick hitch compatible|
|Self-contained hydraulic drive||Standard|
|Electronic variable pickup speed control from tractor cab||via ISOBUS terminal|
|Conveyor direction control from tractor cab||via ISOBUS terminal|
|ON/OFF conveyor control without disengaging the pickup||via ISOBUS terminal|
|Pickup height gauge||via ISOBUS terminal|
|Transport width||12'1" (3.7 m)|
|Transport length||29' (8.8 m)|
|Transport height||12' 5" (3.8 m)|
|Tires||Standard 550/45-22.5 flotation tires, mounted|
|Central lube system||Optional|
|PTO||1 3/8" shaft - 21 spline|
|PTO speed||1,000 rpm|
|Minimum PTO power requirement||140 hp (104 kW)|
|Road lights and signaling||Standard|
|Required tractor electrical connections||1 SAE 7 pin light connection, 12V power, ISOBUS plug|
|Required tractor hydraulic connections||3 DA; no float valve required|
|Approximate machine weight||17,000 lbs (7,711 kg)|