Kuhn DOMINATOR 4860-13
Adjustable, hydraulic constant-flow 25” diameter coulters, with 8” spacing, are indexed to each sub-soil shank maintaining a uniform cutting pressure across varying soil and heavy residue. A new heavy-duty scraper bar weldment prevents residue and wet soil from building between coulter blades. Coulters are indexed so a single blade is operating on each side of the subsoil shank. Increase the coulter hydraulic down pressure for a blacker, rougher field finish or decrease coulter down pressure for a smaller clod size with an extremely level field finish. Coulter gangs are mounted with Rock-Flex bearing arms for added protection. Coulters feature PEER® TILLXTREME™ maintenance-free bearings.
Subsoil shanks on 24” spacing provide optimum cut widths for available horsepower per foot of cut. This double-rank design allows for a minimum of 48” between adjoining shanks for maximum “no-plug” residue and soil flow.
Compaction reduction and subsoil maintenance are accomplished through 3,000-pound point load, auto-reset subsoil shanks. Shanks are equipped with Double K™ ripper points and offer a maximum operating depth of 16 inches.
Double K™ Points
Double K ripper points double the wear life of prior KUHN Krause Dominator fabricated steel and carbide-capped ripper points. Solid casting increases durability in rocky conditions. Choose between the 26.5-pound, 7” wing ripper point and the 22-pound, 2.5” straight ripper point.
REAR DISC CONDITIONER
Rear Disc Conditioner
Left and right sections of the rear disc conditioner are configured in a reverse tandem design that first moves soil inward, then outward in opposite directions, to aggressively mix and bury residue, size large clods and level the soil. The disc conditioner is hydraulically controlled with a lower limit adjustment valve. Uniform 12” spacing is maintained with individually mounted, 24” fluted, shallow concavity blades. Disc conditioner blade configuration offers a level field finish while functioning within a wide range of operating speeds. Individual rear disc conditioner blade assemblies use a proven sealed bearing with a 5-bolt hub for blade attachment.
Heavy-Duty 24/7® Conditioning Reel
Choice of heavy-duty round bar or heavy-duty flat bar reel with PEER® TILLXTREME™ maintenance-free bearing assemblies mounted on heavy-duty ductile cast bearing arms provides aggressive clod sizing and soil firming. Hydraulic control for reel lift is standard.
|Transport Width (ft/m)||17'9" / 5.4|
|Transport Height (ft/m)||13'6" / 4.1|
|Frame Type||Folding 3-Section|
|Number of Shanks||13|
|Shank Spacing (in/cm)||24 / 61|
|Working Width (ft/m)||26 / 7.9|
|Approximate Shipping Weight Less Reel Option (lb/kg)||32,308 / 14 655|
|Approximate Shipping Weight with Reel Option (lb/kg)||34,125 / 15 479|
|Hitch Type||CAT IV Articulating Ball Hitch for 2" Pin|
|Tongue Type||Guardian Hitch™ (Cushion Tongue)|
|Depth Control||Single Point Hydraulic Depth Control|
|Hydraulics||Cylinders with Royal Plate Plus®, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses|
|Coulter Blades||25" x 1/4" Smooth|
|Coulter Gangs||8 inch spacing, Adjustable Constant Flow Hydraulic, Heavy-Duty 6" Bell Diameter Ductile Iron Spools, 1-3/4" Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex Bearing Arms 1-1/4" x 2-1/2"|
|Shanks||3,000lb Point Load Spring Reset Parabolic Sub-Soil Shank, 1-1/4 x 4" Shank Size with Wear Bar, 21" Trip Height, 39" Underframe Clearance, 16" Working Depth|
|Points||Double K™, Chromium Carbide, 7" Winged Ripper Points|
|Main Frame Wheels||Four 440/55 R18 Metric Tires, Walking Beams, Slip-In Spindles, Maintenance-Free Spherical Bearings, 8-Bolt Heavy Duty Hubs|
|Wing Frame Wheels||One 360/65 R17.5 per Wing 8-Bolt Hub|
|Hydraulic Controlled Rear Disc Conditioner||24" x 6 gauge, Fluted Shallow Concavity Disc Blades, 12" Blade Spacing, Remote Single-Point Hydraulic Lower Limit Stop, Reversed Tandem Design|
|Hydraulic Controlled Conditioning Reel||Yes|
|Transport Locks and Safety||Hydraulic Valves, Transport and Wing fold, Slow Moving Sign, High Visibility LED Lighting|
|Hitch Type||CAT V Articulating Ball Hitch for 2-3/4" Pin|
|Tongue Type||Mechanical Adjustable, Self-Leveling Tongue|
|Points||Double K™, 2-1/2" Cast Chromium Carbide, Straight Ripper Point|
|Rear Conditioning Reel||None|
|Rear Conditioning Reel||24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings|
|Hydraulic Controlled Conditioning Reel||None|
|Rear Attachment||Rear Hitch Attachment for Use on Machines Without 24/7® Soil Conditioning Reel|
|Recommended Tractor Power Range (PTO hp / kW)||390 - 520 / 291 - 388|
|Recommended Working Depth (in/cm)||8 - 16 / 20 - 40|
|Recommended Operating Speed (mph/km/h)||4 - 7 / 6 - 11