John Deere WC12 Series Wood Chippers
- Pull-type unit with drawbar
- Adjustable discharge chute
- Reversible, hydraulic feed roll
- Get a Quote Schedule Demo Build Your Own PowerGard Extended Warranty
- Find My Location
- Payment Calculator
- View Product Brochure
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Adjustable discharge chute accurately discharges to desired location
The discharge chute rotates 360 degrees for fast and easy positioning.
The chute also features an adjustable deflector to accurately direct the wood chips to the desired location.
Hydraulic feedroll mounted on spring-loaded frame
The hydraulic feedroll is mounted on a spring-loaded frame on the WC12 Series Wood Chippers, allowing it to raise up and down depending on the size of the timber going through.
The speed of the feedroll can be adjusted on the side of the wood chipper with the hydraulic flow valve.
Reversible feedroll has three positions that are easy to adjust on the feed box
Engagement of the feedroll is done by pushing or pulling the handle that wraps around the outside of the feed box. The feedroll has three positions: neutral, reverse, feed (forward).
The feedroll grabs the material as it is fed into the chipper and allows the operator to step away while it automatically pulls material into the knives.
Self-contained hydraulic kit for WC12 Series Wood Chippers
This factory-installed, self-contained hydraulic kit is for tractors with less than 22.7 L/min (6 gpm) of hydraulic capacity or with no available rear selective control valves (SCVs). The kit contains a hydraulic reservoir and power take-off (PTO) driven hydraulic pump.
|Chip opening||229x406 mm
|Hopper opening||711x1067 mm
|Feed_x001A_roller diameter||393.7 mm
|Hopper height||68.6 cm
|Adjustable||Rotation: 360 degree (angle)|
|PTO rpm||540 rpm|
|HP range (Tractor PTO hp)||56-86 kW
|iMatch™ or Quik-Coupler|
|Knife size||1.59x11.43x22.86 mm
|Knife bolt||Gr 8 hex head bolts: 15.9 mm
|Shear bar||A8 Hardened Anvil|
|Rotor rpm||2050 rpm|
Belt drive system
|Type||B-7 banded belt|
|Time period||1 year|
Centre Hall, PA
East Palestine, OH
Fairmount City, PA