John Deere DH5110
Frontier Heavy Offset Disks DH5110
Share This Product:
Features
- Adjustable disk blade scrapers increase productivity
- Clevis hitch is durable for those tough working conditions
- Disk blades (notched or smooth) available in two sizes
- End washers and wrenches keep gang shaft end nut tight
- Oil bath tapered roller bearings minimize maintenance
- Rear hitch for attaching an additional implement
- Transport locks secure disk wings
- Two separate control arms create consistent performance
Specifications
Transport
| Width | 4 m 13 ft |
| Ground clearance with base blades | 20.3 cm 8 in. |
| Wheel hub bearings | Dual Tapered Roller Bearings |
Working
| Approximate working width | 3.7 m 12 ft |
| Maximum penetration | 22.9 cm 9 in. |
Weight
| Net | 2,887.1 kg 6,365 lb |
| Weight per disk blade | 115.7 kg 235 lb |
Tractor requirements
| Recommended PTO hp range | 96-118 kW 129-159 hp |
| Recommended drawbar hp range | 82-100.7 kW 110-135 hp |
Frame
| Type | Single Offset Rigid |
| Duty | General Purpose |
| Tube size | 12.7x12.7x0.95 cm 5x5x0.375 in. |
Hitch
| Front hitch type | Spade |
| Bolt-on rear hitch |
Disk blades
| Spacing | 26.7 cm 10.5 in. |
| Quantity | 27 |
| Type | Notched (front) Notched (rear) Standard Smooth (front) Smooth (rear) Optional Notched (front) Smooth (rear) Optional |
| Blade concavity | Standard high, Optional low |
Available blade sizes
| Blade option one | 660x7.9 mm 26x0.312 in. |
| Blade option two | 711x7.9 mm 28x0.312 in. |
Disk gangs
| Front angle | 2 Positions |
| Rear angle | 2 Positions |
| Furrow fillers | |
| Axle size | 4.1 cm 1.625 in. or 5.4 cm 2.125 in. |
| Axle material | Round Heat Treated Alloy Steel Threaded on Both Ends |
| Bearing type | Oil Bath Tapered Roller |
| Bearing wear plates | Standard |
| Bearing standards | Welded, Reinforced |
| Scrapers | Adjustable |
Lighting and safety
| Markings | SMV |
| Safety tow chain | Yes |
| Lights | Yes |
Tires
| Type | Implement - Quantity of 4 |
| Size | 9.5L x 15-in. 8 ply |
| Wheel hub type | 6 Bolt |
Set-up time
| Labor hours | 2-3 for two people |
Warranty
| Time period | 1 year |