- On Sale
- Build Your Own
- Used Equipment
-
New Equipment
-
Farm Equipment
-
Lawn & Garden
(Compacts, Mowers & UTVs)
-
Compact Construction
-
Orchard & Vineyard
-
Landscaping & Grounds Care
-
Governmental
-
STIHL
-
All Brands
-
- Trade In
- Parts
- Service
- Order Parts Online
- Equipment Sales
- Precision Farming
-
- The Basics Of Haymaking
- Round Baler Basics for a 460M Round Baler
- How to Load Net Wrap on a 460M Round Baler
- Top 10 Implements For Livestock Operations
- How to store large round bales
- How to set up and operate a mower conditioner
- How to use a mechanical grapple
- Pick up grass clippings using a drive-over mower deck
- PRO Values
- Careers
John Deere 3025E Compact Utility Tractor
Features
Optional iMatch™ Quick-Hitch feature allows for easy implement hookup
iMatch Quick-Hitch (LVB25976)
One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.
- All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.
NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
- Upper bushing
- Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
- Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
- Lower bushings
- Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
- Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)
Key Specs
| Engine power (gross) | SAE J1995 rated power: 18.2 kW 24.4 hp 24.7 PS at 2400 rpm |
|---|---|
| Power take-off (PTO) power | 13 kW 17.4 hp |
| Steering hydraulics | 15 L/min 4 gpm |
| Implement hydraulics | 20.2 L/min 5.3 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Cruise control | Optional |
| Approximate shipping weight (open-station; cab) | Open operator station (OOS): 1181 kg 2603 lb Cab: Not applicable |
| Wheelbase | 1593 mm 62.7 in. |
Engine
| Family | EYDXL1.64NDA FYDXL1.64NDA GYDXL1.64NDA |
|---|---|
| Manufacturer | Yanmar |
| Engine model | 3TNV88F-EPJT2 |
| Engine power (gross) | SAE J1995 rated power: 18.2 kW 24.4 hp 24.7 PS at 2400 rpm |
| Power take-off (PTO) power | 13 kW 17.4 hp |
| Rated engine speed | 2400 rpm |
| Type | Diesel |
| Injection pump type | Direct injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | 3 / 1.64 L 3 / 100.2 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 88 x 90 mm 3.46 x 3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Air cleaner | Dual element |
| Engine torque at rated speed | 72.4 Nm 53.4 lb-ft |
| Fuel tank capacity | 28.5 L 7.5 U.S. gal. |
Electrical
| Battery size | 500 CCA |
|---|---|
| Alternator (12-V) | 55 amp |
| Starter size | 1.4 kW 1.9 hp |
Fuel system
| Type | Direct injection |
|---|---|
| Fuel consumption |
Transmission
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
|---|---|
| Optional transmission; forward/reverse | |
| Left-hand reverser | No |
| Transmission gear ranges | |
| Final drive | Spur gear |
| Brakes | Wet disk |
| Steering | Power steering |
| Clutch, wet/dry | |
| Clutch disk diameter wet clutch | |
| Axle capacity | Front 880 kg 1940 lb Rear 1200 kg 2645 lb |
| Creeper | No |
| Cruise control | Optional |
| Differential lock | Yes |
| Drawbar maximum vertical load |
Hydraulics
| Type | Open center |
|---|---|
| Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
| Pump type | Dual gear |
| Maximum operating pressure | 172 bar 2495 psi |
| Draft control sensing | Position control |
| Remote control valves available | Up to two (optional) |
3-point hitch
| Type | Category 1 |
|---|---|
| Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
Power take-off (PTO)
| Standard | Rear - 540 rpm |
|---|---|
| Optional | |
| Control | Independent |
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
| Engagement method |
Fluid capacities
| Crankcase with filter | 4.5 L 4.8 qt |
|---|---|
| Transmission and hydraulic system | 20.8 L 22 qt |
Final drive
| Type | Spur gear |
|---|---|
| Differential lock |
Operator station
| Rollover protective structure | Type Foldable |
|---|---|
| Platform - flat/straddle | Straddle |
| Gear shift location - console/floor | Left-hand side |
Cab
| Compliance | |
|---|---|
| Visibility | |
| Air conditioning, temperature differential | |
| Doors | |
| Noise rating | |
| Seat equipment |
Dimensions
| Height | |
|---|---|
| Wheelbase | 1593 mm 62.7 in. |
| Front axle clearance | Minimum: 299 mm 11.8 in. Maximum: 333 mm 13.1 in. |
| Turning radius with brakes | |
| Turning radius without brakes | 2.9 m 9.4 ft |
| Limited slip differential | |
| Approximate shipping weight (open-station; cab) | OOS: 1181 kg 2603 lb Cab: Not applicable |
Tires
| Front | R1 Bar: 7-14 R3 Turf: 27x8.5-15 R4 Industrial: 25x8.5-14 R4 Industrial: 27x8.5-15 |
|---|---|
| Rear | R1 Bar: 11.2-24 R3 Turf: 41x14-20 R4 Industrial: 15-19.5 R4 Industrial: 43x16-20 |
| Front tread range | |
| Rear tread spacing |
Miscellaneous
| Toolbox | |
|---|---|
| Tilt steering wheel | |
| 12-V Outlet |
Additional information
| Date collected |
|---|