The ballast box can be used to carry additional ballast for greater tractor stability.

A 9-in. high extension can be added to ballast box for even greater capacity.

A bushing kit is required for the ballast box to be used with the iMatch™ Quick Hitch.

 

 

Overview

 

The bucket level indicator assists the operator in determining the attachment position at ground level.

It is adjustable to indicate level position for different attachments such as pallet forks and buckets.

The indicator is adjusted to have the bend of the rod rest in the bracket when the attachment is level at ground.

 

To adjust the rod to be level for different implements:

1. Position the bucket/attachment level on the ground
2. Loosen the cap screw and adjust the indicator rod until the top of the rod is even with the bracket
3. Tighten the cap screw

Heavy-duty buckets are available for tasks requiring more robust bucket designs. Recommended for heavier use applications, such as commercial operations.

 

The top surface of the bucket is parallel to the cutting edge, which aids the operator as a leveling guide.

 

Additional strength is built into the bucket design with additional wear bars, boxed top bucket section, and bucket end plate supports.

 

The cutting edge has pre-drilled holes for the addition of a replaceable cutting edge.

 

Bucket specs:

Carrier	Compact loader carrier
Type	Heavy-duty
Width	1550 mm (61 in.)
Weight	111.5 kg (246 lb)
Height	515 mm (20.2 in.)
Depth	590 mm (23.1 in.)
Struck capacity	0.25 cu m (9.0 cu ft)
Heaped capacity	0.30 cu m (10.6 cu ft)

Compare bucket specs for compact utility tractor loaders

Materials buckets are available to match tractor and loader applications.

 

They may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose tasks.

IMPORTANT: Materials buckets are not recommended for heavy-duty tasks. For heavier use applications, use a heavy-duty bucket.

 

The top surface of the bucket is parallel to the cutting edge, which the operator can use for assistance as a leveling guide on non-self-leveling (NSL) loaders.

 

The Quik-Change connection is available for easy on and off.

 

The round-back design helps material flow when filling or dumping the bucket.

Materials buckets are available to match tractor and loader applications. They may be used for loading dirt, gravel, feed and light materials, as well as scrapping, digging and other general purpose tasks.

 

IMPORTANT: Materials buckets are not recommended for heavy-duty tasks. For heavier-use applications, use the heavy-duty bucket.

 

The top surface of the bucket is parallel to cutting edge, which aids the operator as a leveling guide.

There is a quik-change connection for easy on and off.

 

The round-back design helps material flow when filling or dumping the bucket.

 

Bucket specs:

Carrier	Compact loader carrier
Type	Materials
Width	1850 mm (73 in.)
Weight	101.2 kg (223 lb)
Height	516 mm (20.2 in.)
Depth	591 mm (23.1 in.)
Struck capacity	0.30 cu m (10.7 cu ft)
Heaped capacity	0.36 cu m (12.8 cu ft)

Compare bucket specs for compact utility tractor loaders

 

 

Overview

 

The Quik-Change attachment carrier allows one person to quickly change attachments without the use of tools. Simply roll the attachment back with the boom slightly off the ground, remove the retaining pins, and then roll the attachment forward and lower to the ground. To connect to another attachment simply align the attachment carrier with the hooks of the attachment, raise the boom for the carrier to engage the hooks of the attachment and rollback the attachment carrier. Then install the retaining pins and the carrier is ready to work.

This provides a very effective means of changing attachments without having to purchase an option to facilitate changing attachments

 

The skid steer attachment carrier is installed in place of the standard John Deere attachment carrier and allows for the use of skid steer attachments on the 320R, H165, 440R, and H180 Loaders.

Overview

Hood guards offer additional protection to the front end of the tractor. Hood guards are required to be used when a loader is installed on the tractor and is optional if a loader is not being used. Some hood guards offer additional kits such as deluxe hood guard attachments that further prevent debris from contacting the grille of the tractor.

Overview

Hood guards offer additional protection to the front end of the tractor. Hood guards are required to be used when a loader is installed on the tractor and is optional if a loader is not being used. Some hood guards offer additional kits such as deluxe hood guard attachments that further prevent debris from contacting the grille of the tractor.

This bundle consists of the hoses and parts to connect the loader boom hydraulic lines of the 300R and H160 Loaders to the mid-mount area hydraulic couplers on the right-hand side of the compatible tractor.

Provides hydraulic couplers at the front of the loader boom for operating attachments that require third-function hydraulics.

NOTES:

1. Tractor must be equipped with a third SCV.
2. If used with skid steer attachments, the couplers will not match. The following parts are required to convert for this application:

Overview

iMatch™ Bushing Kits are the fast and simple solution for making 3-point implements compatible with iMatch Quick Hitches.

Benefits

• Fast and simple conversion - to make implements with Category 1 3-point pins compatible with iMatch Quick Hitches
• Easy installation - requiring only a hammer to insert the roll pins

 

NOTE: All implements (box blades, tillers, rear blades, landscape rakes, etc.) require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier.

Overview

Mounting frames are designed at the same time as the tractor in order to provide durable and yet very simple attaching points for the loader. The mounting frames bolt to the tractor chassis and do not restrict tractor use when the loader is not installed.

Overview

Mounting frames are designed at the same time as the tractor in order to provide durable and yet very simple attaching points for the loader. The mounting frames bolt to the tractor chassis and do not restrict tractor use when the loader is not installed.