- On Sale
- Build Your Own
- Used Equipment
-
New Equipment
-
Farm Equipment
-
Lawn & Garden
(Compacts, Mowers & UTVs)
-
Compact Construction
-
Orchard & Vineyard
-
Landscaping & Grounds Care
-
Governmental
-
STIHL
-
All Brands
-
- Trade In
- Parts
- Service
- Order Parts Online
- Equipment Sales
- Precision Farming
-
- The Basics Of Haymaking
- Round Baler Basics for a 460M Round Baler
- How to Load Net Wrap on a 460M Round Baler
- Top 10 Implements For Livestock Operations
- How to store large round bales
- How to set up and operate a mower conditioner
- How to use a mechanical grapple
- Pick up grass clippings using a drive-over mower deck
- PRO Values
- Careers
John Deere 1025R Sub-Compact Tractor
Features
Spend more time working and less time switching equipment with easy implement swaps
Drive-over deck makes connection simple
1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.
- AutoConnect Deck System: Connect a mid-mount mower deck to the tractor in less than 60 seconds without leaving the seat except to lock the gauge wheels.
- Load-N-Go attachment: Easily move your 54D or 60D AutoConnect Deck with your John Deere Loader after it has been disconnected from the tractor with the Load-N-Go ramps.
- Quik-Park™ Loader System: 120R Quik-Park™ Loaders are designed for easy mounting and removal in about a minute, with no tools needed.
- Quik-Tatch™ front hitch: Save time switching front implements like a snow blower, rotary broom, or front blade without tools.
- iMatch™ quick-hitch: Easily hookup Category 1 implements in seconds using three fixed points to back in and pick up rear implements without leaving the seat
- Position control hitch: Set the rear hitch height and then consistently lower the hitch to the exact height every time, which is especially useful in grading and leveling applications.
- Quik-Knect™ system: Connect power take-off (PTO)-driven implements quickly and with low physical effort. The Quik-Knect system utilizes one connector for the tractor’s PTO shaft and a designated connector for each implement which eliminates twisting and forcing splines to align.
1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased.
Quickly and easily change speed and directions with Twin Touch foot controls and Hydrostatic transmission (HST)
Twin Touch™ pedals
The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.
- Ideal for loader or mower applications where frequent direction and speed changes are needed
- No clutching for fast direction changes
- Match the job at hand with infinite ground speeds
Excellent maneuverability and easy operation with standard four-wheel drive (4WD) and power steering
Standard 4WD and power steering make 1 Family Tractors excellent for mowing
Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.
- Narrow overall width allows you to work in tight areas where most compact tractors just cannot fit. The 144.8-cm (57-in.) wheel base and 119.4 cm (47 in.) overall width gives great stability for all types of terrain.
- Power steering means fewer turns of the steering wheel than manual steering, which is especially valuable when mowing around obstacles or during front loader work.
- High horsepower-to-weight ratio makes the 1 Family Tractors a good choice for a variety of tasks. The overall tractor weight reduces ground compaction and makes them excellent for mowing.
- The fully-independent power take-off (PTO) allows engaging and disengaging of the PTO without stopping tractor movement. This is important when driving across obstacles such as driveways while mowing.
Comfortable and convenient open operator’s station
1025R open operator station
The 1025R open operator station is designed for greater comfort and increased visibility.
Comfortable operation
- Thick, textured rubber floor mat reduces vibrations and absorbs shock and noise
- Step-through flat platform and fender-mounted handrails make it easy to get on and off the tractor from either side
- Controls are conveniently located next to the fenders and are color-coded for quick identification
- Tilt steering lets you keep your arms in a natural position to reduce fatigue
- Deluxe suspension seat has moveable armrests and provides great back support
- Easy access toolbox puts common tools within quick reach
- Standard 12-V outlet for convenient charging of electronics
- Easy-lift hood with dual gas-charged lift struts as standard equipment. A simple flip of the latch lets you open the rugged composite hood, providing wide open access to the engine compartment.
- Foldable rollover protective structure (ROPS) keeps you protected during operation and improve the ability to store tractor in a garage
Foldable Roll-Gard ROPS
Foldable Roll-Gard™ ROPS is standard equipment on 1025R
Increased visibility
- Sloping hood design provides improved visibility especially during front loader work
- Standard lighting equipment allows you to work from early in the morning to late at night:
- Two front-mounted light-emitting diode (LED) headlights
- Two amber-flashing warning/hazard lights mounted on the side of the ROPS with reflectors
- Two LED fender work lights
- Additional front- and rear-light kits are available
Instrumentation
Instrumentation
Updated instrumentation is standard equipment for operating convenience and confidence. Instrumentation includes:
- Tach/hour meter
- Oil-pressure indicator light
- Alternator-indicator light
- Flashing-warning lights
- Coolant-temperature light
Premium seat
Premium seat
The thick, soft padding on this seat provides a smooth and comfortable ride. A high, scalloped back makes it easier for the operator to turn to view rear implements. The embroidered logo and premium vinyl not only provide an easy-to-clean surface but also a well-polished design.
- Seat adjusts fore/aft for operator convenience
- Seat flips forward for protection from the elements
- High seat back and armrests are in base equipment and allow for a more comfortable operation
- Retractable seat belt feature prevents the seat belt from becoming tangled in the seat suspension and controls
12-V outlet
12-V outlet
The 1025R Tractor features a 12-V outlet conveniently located on the right-hand side fender for easy access. The placement of the 12-V outlet is within arm's reach.
Mower deck height-adjustment knob
Mower deck height-adjustment knob
- The mower deck height-adjustment knob allows the mower height to be adjusted from 2.5 cm to 10.2 cm (1 in. to 4 in.).
- A spring-loaded detent ensures the height position is locked into place.
- The transport lock position holds the deck 10.2-cm (4-in.) from the ground, so that rear implements can be used separately while the mower is installed.
Rear installed toolbox
Rear installed toolbox
The 1 Family Tractor features a rear installed toolbox for easy accessibility and convenience.
Beverage holder
Beverage holder
The beverage holder is contour-molded and seated into the fender for a clean look. It is conveniently located and dual-sized to accommodate many containers. The placement of the cup holder is within arm's reach.
Fuel fill and fuel gauge locations
Fuel fill and fuel gauge locations
The fuel fill location is conveniently accessible on the left-hand side fender. The fuel gauge is located in close proximity to make the fuel refilling process easier.
Tilt steering
Tilt steering
The 1 Family Tractors feature tilt steering for easy maneuverability and convenience.
Get year-round performance with the optional cab
Heated cab is ideal for cold weather chores
The John Deere 1R cab is about comfort, security, and helping you get year-round performance. The cab offers protection from the elements to expand the versatility of 1025R Tractors to perform in all climates.
- Sound damping system for quiet, peace-of-mind operation
- Heated cab keeps you warm in colder months
- Removable doors and front and rear windows that open nearly 90 degrees provide a cooler work environment in warmer months.
- Excellent visibility to your surroundings with the full glass doors
- Compatible with all tractor implements except the 260B Backhoe
Flexibility in operation with multiple mid-mower lift system options
Mid-mower lift system options
Mid-mower lift system options
Standard mechanical mower lift
The standard mechanical mower lift system moves the mower in conjunction with the rear implements and comes factory-installed on 1 Family Tractors.
Optional hydraulic mower lift
The optional hydraulic mower lift system allows the mower to be raised and lowered independently of the rear implements. It uses the loader joystick to lift and lower the mower deck.
Optional independent hydraulic mower lift
The optional independent hydraulic lift system allows the mower to be raised and lowered independently of the rear and front implements. It operates using a rocker switch mounted on the tractor, located at the operator’s left knee.
For more information on this mid mower lift system click here.
Key Specs
| Engine power (gross) | SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 rpm |
|---|---|
| Power take-off (PTO) power | 12.8 kW 17.2 hp |
| Steering hydraulics | 13.2 L/min 3.5 gpm |
| Implement hydraulics | 13.2 L/min 3.5 gpm |
| Hitch type | Limited Category 1 |
| Lift capacity, 24-in. behind link arms | 344 kg 758 lb |
| Standard transmission; forward/reverse | Hydrostatic - two range |
| Cruise control | Standard |
| Approximate shipping weight (open-station; cab) | Open station: 706 kg 1556 lb Cab: 906 kg 1996 lb |
| Wheelbase | 1450 mm 57.1 in. |
Engine
| Family | |
|---|---|
| Manufacturer | Yanmar® |
| Engine model | 3TNV80F-NCJT |
| Engine power (gross) | SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 seconds |
| Power take-off (PTO) power | 12.8 kW 17.2 hp |
| Rated engine speed | 3200 rpm |
| Type | Diesel |
| Injection pump type | Indirect injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | Three cylinders: 1.267 L 77.3 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 80 x 84 mm 3.15 x 3.31 in. |
| Compression ratio | 23.1:1 |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Air cleaner | Dual element with mechanical restriction indicator |
| Engine torque at rated speed | 53.1 Nm 39.2 lb-ft |
| Fuel tank capacity | 24 L 6.3 U.S. gal. |
Electrical
| Battery size | 500 CCA |
|---|---|
| Alternator (12-V) | 40 amp |
| Starter size | 1.2 kW 1.6 hp |
Fuel system
| Type | Indirect injection |
|---|---|
| Fuel consumption |
Transmission
| Standard transmission; forward/reverse | Hydrostatic - two range |
|---|---|
| Optional transmission; forward/reverse | |
| Left-hand reverser | No |
| Transmission gear ranges | |
| Final drive | Spur gear |
| Brakes | Wet disc (left-hand pedal) |
| Steering | Power |
| Clutch, wet/dry | |
| Clutch disk diameter wet clutch | |
| Axle capacity | Front 612 kg 1349 lb Rear 715 kg 1576 lb |
| Creeper | No |
| Cruise control | Standard |
| Differential lock | Yes |
| Drawbar maximum vertical load |
Hydraulics
| Type | Open center |
|---|---|
| Pump rated output | Steering 13.2 L/min 3.5 gpm Implement 13.2 L/min 3.5 gpm 24 L/min 6.3 gpm |
| Pump type | Single gear |
| Maximum operating pressure | 138 bar 2000 psi |
| Draft control sensing | Position control |
| Remote control valves available | Three |
3-point hitch
| Type | Limited Category 1 |
|---|---|
| Lift capacity, 24-in. behind link arms | 344 kg 758 lb |
Power take-off (PTO)
| Standard | Rear: 540 rpm Mid: 2100 rpm |
|---|---|
| Optional | |
| Control | Independent |
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
| Engagement method |
Fluid capacities
| Crankcase with filter | 2.7 L 2.9 qt |
|---|---|
| Transmission and hydraulic system | 12.3 L 3.2 gal. |
Final drive
| Type | Spur gear |
|---|---|
| Differential lock | Yes |
Operator station
| Rollover protective structure | Type Foldable Yes |
|---|---|
| Platform - flat/straddle | One-piece semi flat |
| Gear shift location - console/floor | Left-hand side |
Cab
| Compliance | |
|---|---|
| Visibility | |
| Air conditioning, temperature differential | Heat only |
| Doors | Two |
| Noise rating | |
| Seat equipment | Premium seat |
Dimensions
| Height | |
|---|---|
| Wheelbase | 1450 mm 57.1 in. |
| Front axle clearance | 195 mm 7.7 in. |
| Turning radius with brakes | |
| Turning radius without brakes | Outside front tire: 2.51 m 8.2 ft |
| Limited slip differential | No |
| Approximate shipping weight (open-station; cab) | Open station: 706 kg 1556 lb Cab: 906 kg 1996 lb |
Tires
| Front | R3 Turf: 18x8.50-10 R3 Turf Radial: 18x8.50-10 R4: 18x8.5-10 |
|---|---|
| Rear | R3 Turf: 26x12-12 R4: 26x12-12 |
| Front tread range | 931 mm 36.7 in. |
| Rear tread spacing | 895 mm 35.2 in. |
Miscellaneous
| Toolbox | Yes |
|---|---|
| Tilt steering wheel | |
| 12-V Outlet |
Additional information
| Date collected |
|---|
Accessories and Attachments
Accessories
Chain Box - 028NLV5WS812470
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
- Customizable and expandable with multiple mounting locations and tool holder designs
- On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
- Does not interfere with tractor functionality
- Increased capability when doing off tractor tasks
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Chainsaw Holder - 028NLV5WS812460
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
- Customizable and expandable with multiple mounting locations and tool holder designs
- On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
- Does not interfere with tractor functionality
- Increased capability when doing off tractor tasks
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Clamp Kit - 028NLV5WS812485
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
- Customizable and expandable with multiple mounting locations and tool holder designs
- On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
- Does not interfere with tractor functionality
- Increased capability when doing off tractor tasks
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Handheld Leaf Blower Holder - 028NLV5WS812466
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
- Customizable and expandable with multiple mounting locations and tool holder designs
- On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
- Does not interfere with tractor functionality
- Increased capability when doing off tractor tasks
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Long Tool Holder (2) - 028NLV5WS812450
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
- Customizable and expandable with multiple mounting locations and tool holder designs
- On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
- Does not interfere with tractor functionality
- Increased capability when doing off tractor tasks
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Long Tool Holder (4) - 028NLV5WS812455
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
- Customizable and expandable with multiple mounting locations and tool holder designs
- On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
- Does not interfere with tractor functionality
- Increased capability when doing off tractor tasks
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Mini Clamp Kit - 028NLV5WS812480
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
- Customizable and expandable with multiple mounting locations and tool holder designs
- On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
- Does not interfere with tractor functionality
- Increased capability when doing off tractor tasks
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
ROPS Rack - 028NLV5WS812425
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
- Customizable and expandable with multiple mounting locations and tool holder designs
- On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
- Does not interfere with tractor functionality
- Increased capability when doing off tractor tasks
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
String Trimmer Holder - 028NLV5WS812475
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
- Customizable and expandable with multiple mounting locations and tool holder designs
- On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
- Does not interfere with tractor functionality
- Increased capability when doing off tractor tasks
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Super Clamp Kit - 028NLV5WS812490
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
- Customizable and expandable with multiple mounting locations and tool holder designs
- On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
- Does not interfere with tractor functionality
- Increased capability when doing off tractor tasks
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Universal Mount Kit - 028NLV5WS812435
Tool storage products on wall
Tool storage products on 3E Tractor
5WS812430 rollover protective structure (ROPS) rack
5WS812430 ROPS rack on 3E
5WS812435 universal mount
5WS812460 chainsaw holder
5WS812450 two tool holder
5WS812455 four tool holder
5WS812480, 5WS812485, and 5WS812490 on ROPS rack
Overview
The John Deere tool storage solutions provide the tractor customer with customizable tool storage to carry commonly used landscaping tools and power equipment on the tractor without having to make multiple trips to the garage.
Benefits
- Customizable and expandable with multiple mounting locations and tool holder designs
- On and off tractor storage – Can be mounted to the ROPS rack, Ballast Box, iMatch™, Shed wall and more
- Does not interfere with tractor functionality
- Increased capability when doing off tractor tasks
5WS812466 leaf blower holder
5WS812470 chain box
5WS812475 on ROPS rack
5WS812475
Alternator
55 Amp Alternator - 028NLVBLV11188
BLV11188 55-amp alternator
Overview
Increase electrical output and charging potential by upgrading from the standard factory 40-amp alternator to a 55-amp alternator. This alternator adds additional charging power for increased electrical demands.
Backhoes
16 In. Bucket (0.90 Cu. Ft.) - 028NLVBLV10026
BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength
Overview
Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.
8 In. Bucket (0.42 Cu. Ft.) - 028NLVBLV10024
BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength
Overview
Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.
Grab Handle and Mounting Parts - 028NLVBXX10278
BXX10279 Subframe mounting kit shown
BLV10594 Subframe mounting kit shown
BXX10278 Grab Handle and mounting parts shown
Overview
Backhoe mounting kits are required to add a backhoe to a compact utility tractor.
NOTE: Power beyond kit is required on all tractors for proper backhoe installation and functionality
Hydraulic Thumb - 028NLVBXX10248
Mechanical thumb shown on 485 backhoe
Thumb schematic shown
BXX10248 Hydraulic thumb kit shown
BXX10248 Hydraulic thumb kit shown
BXX10891 Hydraulic Thumb Kit shown
Overview
Backhoe thumb kits add increased functionality of the backhoe by allowing an operator to easily grab items such as logs and debris. Thumb kits come in both mechanical and hydraulic versions with fixed or on the fly position adjustments.
Mechanical Thumb - 028NLVBLV10750
Mechanical thumb shown on 485 backhoe
Thumb schematic shown
BXX10248 Hydraulic thumb kit shown
BXX10248 Hydraulic thumb kit shown
BXX10891 Hydraulic Thumb Kit shown
Overview
Backhoe thumb kits add increased functionality of the backhoe by allowing an operator to easily grab items such as logs and debris. Thumb kits come in both mechanical and hydraulic versions with fixed or on the fly position adjustments.
Ripper - 028NLVBXX10247
BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength
Overview
Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.
Trenching Bucket - 028NLVBXX10246
BXX10246 Trenching bucket shown
BXX10247 Ripper tooth shown
406-mm (16-in.) bucket for 260 backhoe shown
Heavy-duty roll tube for extra strength
Overview
Backhoe buckets offer increased backhoe performance depending on the task at hand. Whether you need a heavy-duty bucket with more capacity, a trencher bucket for a sprinkler install or ripper tooth for hard packed soils, the high strength construction will keep you digging long into the future.
Ballast
Ballast Box Extension - 028NLVBW15074
Ballast box with extension
The ballast box can be used to carry additional ballast for greater tractor stability. A 23-cm (9-in.) high extension can be added to ballast box for even greater capacity.
The hitch utilizes a standard Category 1 configuration for connection to the tractor Category 1 hitch. A bushing kit is required for the ballast box to be used with the iMatch™ Quick-Hitch.
The ballast box extension is only available through Parts; it is not a factory option.
Beacon Lighting
Rotating Beacon Light for 1025R Cab - 028NLVBXX10310
Optional attachments shown
Overview
Dealer-installed attachments are available for the factory-installed cab on the 1025R Tractor to improve functionality and communicate to others in the surrounding area.
Cab Operator's Station
Illuminated License Plate Kit - 028NLVBLV11246
Optional attachments shown
Overview
Dealer-installed attachments are available for the factory-installed cab on the 1025R Tractor to improve functionality and communicate to others in the surrounding area.
Rear Wiper Kit - 028NLVBLV11241
Optional attachments shown
Overview
Dealer-installed attachments are available for the factory-installed cab on the 1025R Tractor to improve functionality and communicate to others in the surrounding area.
Cold Weather Packages
Engine Block Heater Adapter - 028NLVAM134805
Engine block heater adapter
Fits into engine block to help provide faster and easier starts in extremely cold weather (below 0°F or –18°C). Uses 110-volt electricity.
Allow one hour to install.
Engine Coolant Heater Kit - 028NLVBLV10640
Engine coolant heater kit
Attached to the engine cylinder block, the engine coolant heater plugs into a 120-V electrical outlet to warm the engine for fast cold-weather starts.
NOTE: It is recommended to install optional engine coolant heater, transmission oil heater, and battery heating pad (A22400P - ordered through A and I) if operating machine in temperatures below -18 â°C (0â°F).
Electricity
Junction Block - 028NLVBXX10391
BXX10391 junction block kit shown
The junction block kit provides easily accessible dedicated ring terminals (for switched and unswitched power) to operate auxiliary equipment such as lights, sprayers, spreaders, etc.
Applicable John Deere solutions supported by this kit include:
- Electric snow blower spout control
- ShadePro™ canopy fan
Exhaust
Spark Arrester Screen for Muffler - 028NLVLVA15392
Spark arrestor kit shown
BLV11105 Spark arrestor kit shown
Overview
Some engine configurations require a spark arrestor to operate within compliance of local laws and ordinances. An installed spark arrestor must be maintained and in good working order by the operator.
NOTE: It is a violation of California Public Resource Code Section 4442 to use or operate this engine on or near any forest-covered, brush-covered, or grass-covered land unless the exhaust system is equipped with a spark arrestor meeting any applicable local or state laws. Other states or federal areas may have similar laws.
Front Hitch
Front Attaching Support Kit (Quick Hitch) - 028NLVBLV10796
BLV10708 Quick Hitch shown
BLV10796 Front Quick Hitch to Tractor Interface Kit shown
BLV10680 Front Quick Hitch to Tractor Interface Kit shown
BLV10786 Front PTO 2000 RPM CCW Mid Drive shown
BLV10681 Front PTO 2000 RPM CCW Mid Drive shown
BLV10793 Snow Blower Mounting Kit shown
BXX10906 Snow Blower Mounting Kit shown
BLV10899 Snow Blower Drive Shaft shown
BXX10678 Snow Blower Drive Shaft shown
BLV10794 52†Broom Attaching Kit shown
BLV10795 60†Broom Attaching Kit shown
BLV10900 Broom Drive Shaft shown
Front Quick Hydraulic Angling Kit example shown
Overview
Front quick hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.
NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install
Benefits
- Quick installation of implements
- Increased productivity
- Adaptable for various front mounted implements
Hydraulic Angling - 028NLVBLV10880
BLV10708 Quick Hitch shown
BLV10796 Front Quick Hitch to Tractor Interface Kit shown
BLV10680 Front Quick Hitch to Tractor Interface Kit shown
BLV10786 Front PTO 2000 RPM CCW Mid Drive shown
BLV10681 Front PTO 2000 RPM CCW Mid Drive shown
BLV10793 Snow Blower Mounting Kit shown
BXX10906 Snow Blower Mounting Kit shown
BLV10899 Snow Blower Drive Shaft shown
BXX10678 Snow Blower Drive Shaft shown
BLV10794 52†Broom Attaching Kit shown
BLV10795 60†Broom Attaching Kit shown
BLV10900 Broom Drive Shaft shown
Front Quick Hydraulic Angling Kit example shown
Overview
Front quick hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.
NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install
Benefits
- Quick installation of implements
- Increased productivity
- Adaptable for various front mounted implements
SPHC Front Hitch Compatibility Kit - 028NLVBXX10874
BLV10708 Quick Hitch shown
BLV10796 Front Quick Hitch to Tractor Interface Kit shown
BLV10680 Front Quick Hitch to Tractor Interface Kit shown
BLV10786 Front PTO 2000 RPM CCW Mid Drive shown
BLV10681 Front PTO 2000 RPM CCW Mid Drive shown
BLV10793 Snow Blower Mounting Kit shown
BXX10906 Snow Blower Mounting Kit shown
BLV10899 Snow Blower Drive Shaft shown
BXX10678 Snow Blower Drive Shaft shown
BLV10794 52†Broom Attaching Kit shown
BLV10795 60†Broom Attaching Kit shown
BLV10900 Broom Drive Shaft shown
Front Quick Hydraulic Angling Kit example shown
Overview
Front quick hitch kits allow an operator to quickly install snow blowers, brooms and blades to the front of the tractor.
NOTE: Depending on the tractor and implement type, additional kits may be required to complete the install
Benefits
- Quick installation of implements
- Increased productivity
- Adaptable for various front mounted implements
Front Weights
Front Weight Bracket Extension Kit - 028NLVBLV10623
BLV10623 front weight bracket extension kit
Overview
The front weight bracket extension kit allows up to seven Quik-Tatch suitcase weights to be added to the front of the tractor for increased ballast.
Quik-Tatch Weight, 42 lb (19 kg) - 028NLVUC13263
R51680 Front Quik-Tatch™ weights shown
UC13263 Quik-Tatch™ weights shown
Overview
Weights can be installed on the front of a tractor when additional ballast is needed.
NOTE: The weight bracket and weights are not compatible when the loader is installed on the tractor. See the ballasting and optimizing performance section or the tractor operator's manual for additional ballasting information.
Benefits
- Increased ride comfort
- Increased stability
- Acts as a counterbalance to heavy attachments on the front or rear of the tractor.
Hood Guards
Deluxe Hood Guard (1 Series, 2025R Deere MY17 & newer) - 028NLVBW15901
BW15900 Hood Guard shown on 1023E
BW15901 Deluxe Hood Guard shown on 1025R
BW15217 Hood Guard shown
BW15634 Hood Guard shown
BLV10705 Hood Guard shown on 2032R
AW33948 Hood Guard shown
AXX10478 Hood Guard and Side Braces shown
BW14378 Hood Guard shown
BW16585 Deluxe Hood Guard Attachment shown
Deluxe Hood Guard Attachment shown
BW15219 Hood Guard shown
BW16617 Hood Guard shown
BW15416 Hood Guard shown
BW15848 Hood Guard shown
BW16040 Hood Guard shown
BW15534 Hood Guard shown
BW15221 Hood Guard shown
BW16989 Hood Guard shown
BW16393 Hanging Weldment shown
AW36654 Hood Guard shown
BXX10458 Hood Guard shown
BXX10096
Overview
Hood guards offer additional protection to the front end of the tractor. Hood guards are required to be used when a loader is installed on the tractor and is optional if a loader is not being used. Some hood guards offer additional kits such as deluxe hood guard attachments that further prevent debris from contacting the grille of the tractor.
Hood Guard (1023E, 1025R & 1026R Tractors) - 028NLVBW15900
BW15900 Hood Guard shown on 1023E
BW15901 Deluxe Hood Guard shown on 1025R
BW15217 Hood Guard shown
BW15634 Hood Guard shown
BLV10705 Hood Guard shown on 2032R
AW33948 Hood Guard shown
AXX10478 Hood Guard and Side Braces shown
BW14378 Hood Guard shown
BW16585 Deluxe Hood Guard Attachment shown
Deluxe Hood Guard Attachment shown
BW15219 Hood Guard shown
BW16617 Hood Guard shown
BW15416 Hood Guard shown
BW15848 Hood Guard shown
BW16040 Hood Guard shown
BW15534 Hood Guard shown
BW15221 Hood Guard shown
BW16989 Hood Guard shown
BW16393 Hanging Weldment shown
AW36654 Hood Guard shown
BXX10458 Hood Guard shown
BXX10096
Overview
Hood guards offer additional protection to the front end of the tractor. Hood guards are required to be used when a loader is installed on the tractor and is optional if a loader is not being used. Some hood guards offer additional kits such as deluxe hood guard attachments that further prevent debris from contacting the grille of the tractor.
Hydraulics
3rd Function Hydraulic Hose Kit - 028NLVBXX10268
Frontier™ grapple shown on 120R and 2025R
Frontier four-in-one bucket on 120R and 2025R
120R loader connection location on 1E and 1R tractor
120R loader connection on 2025R tractor
Joystick for usage with third-function
120R loader third-function lines on boom
120R loader third-function connection for implements at torque tube area
Overview
Add versatility to the tractor and loader package with the addition of a third-function kit. They enable the use of attachments such as four-in-one buckets, root grapples, and hydraulic angling blades further enhancing the tractors’ ability to help get jobs done.
Tractor series |
Loader model |
Loader bundle for non-self-leveling loaders |
Loader bundle for mechanical self- leveling loaders |
Tractor bundle |
MY20 and newer 1E and 1R |
120R |
BXX10268 |
BXX10370 |
BXX10835 |
MY20 and newer 2025R |
120R |
BXX10210 |
BXX10375 |
BXX10846 |
3rd Function Hydraulic Lines - 028NLVBXX10370
Frontier™ grapple shown on 120R and 2025R
Frontier four-in-one bucket on 120R and 2025R
120R loader connection location on 1E and 1R tractor
120R loader connection on 2025R tractor
Joystick for usage with third-function
120R loader third-function lines on boom
120R loader third-function connection for implements at torque tube area
Overview
Add versatility to the tractor and loader package with the addition of a third-function kit. They enable the use of attachments such as four-in-one buckets, root grapples, and hydraulic angling blades further enhancing the tractors’ ability to help get jobs done.
Tractor series |
Loader model |
Loader bundle for non-self-leveling loaders |
Loader bundle for mechanical self- leveling loaders |
Tractor bundle |
MY20 and newer 1E and 1R |
120R |
BXX10268 |
BXX10370 |
BXX10835 |
MY20 and newer 2025R |
120R |
BXX10210 |
BXX10375 |
BXX10846 |
3rd Function Selective Control Valve - 028NLVBXX10835
Frontier™ grapple shown on 120R and 2025R
Frontier four-in-one bucket on 120R and 2025R
120R loader connection location on 1E and 1R tractor
120R loader connection on 2025R tractor
Joystick for usage with third-function
120R loader third-function lines on boom
120R loader third-function connection for implements at torque tube area
Overview
Add versatility to the tractor and loader package with the addition of a third-function kit. They enable the use of attachments such as four-in-one buckets, root grapples, and hydraulic angling blades further enhancing the tractors’ ability to help get jobs done.
Tractor series |
Loader model |
Loader bundle for non-self-leveling loaders |
Loader bundle for mechanical self- leveling loaders |
Tractor bundle |
MY20 and newer 1E and 1R |
120R |
BXX10268 |
BXX10370 |
BXX10835 |
MY20 and newer 2025R |
120R |
BXX10210 |
BXX10375 |
BXX10846 |
Power Beyond Kit (OOS only) - 028NLVBXX10837
Power beyond kit example shown
LVB25956 Power beyond kit shown
BLV11216 Power beyond kit shown
BXX10915 Power beyond kit shown
BXX10837 Power Beyond Kit shown
BLV10381 Power Beyond Kit shown
Overview
Power beyond kits provide access of pressurized hydraulic oil at the rear of the tractor for operating attachments equipped with an open center control valve, such as a backhoe and log splitter when continuous hydraulic flow is required.
NOTE: When nothing is hooked up to the power beyond, it is critical the loop is closed to ensure proper hydraulic flow.
NOTE: Power beyond kits are not included in the backhoe frame attachments and must be ordered separately.
Rear Tubing Kit - 028NLVBLV10948
BLV10948 hydraulic hose kit shown
Overview
The hydraulic hose kit includes hoses and fittings to route hydraulic connections to the rear of the tractor for use with rear implements.
Lighting
Dual Light Forward Lighting Kit - 028NLVLVB25546
The forward-lighting kit provides extra visibility when working in dark conditions. Lights attach to the brush guards located on the rollover protective structure (ROPS). Each kit contains two lights.
NOTE: Requires BLV10400 warning light brush guard kit and LVB26026 light kit harness. Not compatible with LVB25547 rear work light kit (1023E).
NOTE: Requires BLV10400 warning light brush guard kit. Not compatible with LVB25547 rear work light kit (1025R, 2025R, 2032R, 2038R, 3025E, 3032E, 3038E, 4105, 4044M, 4052M, 4066M).
NOTE: Requires BLV10620 premium warning light brush guard kit. Not compatible with LVB25547 rear work light kit (3033R, 3039R, 3046R, 4044R, 4052R, 4066R).
LED Work Light Kit - 028NLVBLV10497
Rollover protective structure (ROPS) mounted LED work lights
An optional LED work light kit is available for all open-station compact utility tractors. These lights provide extra visibility when working in dark conditions and have 180-degree rotation to face forward or backward. The kit contains two lights and the mounting hardware required for installation.
This lighting kit is mounted to the warning light brush guard kit, which is mounted to the ROPS and requires attachment BLV10400 for installation.
The halogen work light kit attachment is still available (LVB25546).
Open Station Work Light Brush Guard Kit - 028NLVBLV10399
An optional premium light kit is available to provide extra visibility when working in dark conditions. The premium light kit includes the following:
- Two light-emitting diode (LED) fender lights
- Two LED rollover protective structure (ROPS) work lights (adjustable 360 degrees for forward or rear lighting)
- One LED rear PTO light
Premium LED Work Light Kit - 028NLVBLV10673
An optional premium light kit is available to provide extra visibility when working in dark conditions. The premium light kit includes the following:
- Two light-emitting diode (LED) fender lights
- Two LED rollover protective structure (ROPS) work lights (adjustable 360 degrees for forward or rear lighting)
- One LED rear PTO light
Rear Work Light Kit - 028NLVBLV11244
Optional attachments shown
Overview
Dealer-installed attachments are available for the factory-installed cab on the 1025R Tractor to improve functionality and communicate to others in the surrounding area.
Single Rear Auxiliary Rear Work Light Kit - 028NLVLVB25547
Rear work light
This kit provides light to the rear of the tractor for evening work.
For open-station tractors only, this kit contains individual light.
Allow 30 minutes to install.
NOTE: Kit includes one rear light.
NOTE: Both the rear- and forward-work lights are compatible together and with the light-brush guard kits. The light kit contains a two-to-four pigtail that plugs into the main harness, as if only plugging one set of lights, providing two sets of plugs to use for forward and rear-work lights. The forward light is installed on top of the brush guard, and the rear light is installed inside the ROPS using the bolt holding the light and brush guard on.
NOTE: For 102E3 and 1026R Tractors – kit interference during backhoe operations (mounted inside ROPS) – use LVB25546 forward-light kit as an alternative.
Maintenance
Filter Pak - 028NLVTA15270
Typical home maintenance kit
Overview
Filter Paks are a handy and convenient way for you to purchase all the necessary maintenance-interval parts as specified in the operator's manual. These kits contain an oil filter, air filter, fuel filter, and hydraulic filter, offering a complete solution for all maintenance needs to keep tractors running at peak performance.
Benefits of Filter Paks:
- Convenience – all filters in one package
- Value – better pricing than purchasing individual components
- Performance – get the most out of the capability of your tractor
- Easy to understand – indicates models and contents so you never have to worry about the right filters for compact utility tractor
Open Operator's Station
Canopy Kit - Rigid Plastic - 028NLVLP64809
LP64809 canopy shown
Overview
Steel frame construction, ABS plastic roof. Approved for use on small chassis compact utility tractors with both fixed and folding roll over protective structures (ROPS). The canopy protects the operator from direct sun exposure and weather. Heavy-duty construction that is built to last.
License Plate Kit - 028NLVBXX10277
BXX10277 License plate kit shown
Overview
License plate kits allow an operator to display a license plate on the tractor in order to meet local laws and regulations in which to drive on public roads.
Tractor Cover - 028NLVLP95637
LP95637 Tractor cover shown
Overview
Provide all-weather protection to the tractor when not in use with a tractor cover.
Benefits
- Weather resistant material
- Protects against UV damage, rain, dirt, etc.
- Keeps the seat dry
Operator's Station
Cell Phone Suction Cup Kit - 028NLVBXE10606
BXE10606 locking suction mount cell phone assembly
BXE10607 locking suction mount tablet assembly
Overview
Mounting a tablet or cell phone can be done easily with these solutions. These strong and simple-to-use mounts keep all important items right where they are wanted. They are the perfect solution for operators who move to multiple machines, reference information, or make calls or video share while doing repairs.
X-Grip Tablet Dual Suction Cup Kit for Tablets - 028NLVBXE10607
BXE10606 locking suction mount cell phone assembly
BXE10607 locking suction mount tablet assembly
Overview
Mounting a tablet or cell phone can be done easily with these solutions. These strong and simple-to-use mounts keep all important items right where they are wanted. They are the perfect solution for operators who move to multiple machines, reference information, or make calls or video share while doing repairs.
Radio
Heavy-Duty AM/FM, Weatherband, Auxiliary Input, SiriusXM Satellite, Bluetooth Radio - 028NLVSWJHD1635BT
SWJHD1130 radio
SWJHD1130WP short-chassis radio
SWJHD1630 radio
SWJHD1635BT radio
SWSXV200B SiriusXM® tuner (left) and SWR169159 SiriusXM antenna (right)
Overview
The heavy-duty stereo solutions provide radio functionality and allows the operator to pair media or mobile devices via an auxiliary jack or the Bluetooth® wireless system.
Benefits
- Increased operator convenience during long working hours
- Auxiliary, USB, and Bluetooth functionality for media playback
Additional details
Heavy-duty radio feature comparison chart
| Feature | SWJHD1130WP | SWJHD1130 | SWJHD1630 | SWJHD1635BT |
| Chassis | DIN | DIN | DIN | DIN |
| Total output power | 30 W x 4 | 40 W x 4 | 45 W x 4 | 45 W x 4 |
| AM/FM stereo with 30 presets (12 AM, 18 FM) | Yes | Yes | Yes | Yes |
| Seven-channel National Oceanic and Atmospheric Administration (NOAA) weatherband tuner | Yes | Yes | Yes | Yes |
| Weather alert | No | No | Yes | Yes |
| Specific area messaging encoding (S.A.M.E.) | No | No | Yes | Yes |
| Electronic U.S./Euro tuner | Digital with RBDS | Digital with RBDS | Digital with RBDS | Digital with RBDS |
| SiriusXM satellite ready (requires SWSXV200B tuner) | No | No | Yes | Yes |
| Quartz digital clock | Yes | Yes | Yes | Yes |
| CD player | No | No | No | No |
| USB on front panel (iPhone® mobile device charging and control) | No | No | Yes | Front and rear |
| Backlighting | Amber/white | Amber/white | Amber/white | Amber/white |
| Segmented high-visibility liquid crystal display (LCD) | Yes | Yes | No | No |
| Full dot matrix high-visibility display | No | No | Yes | Yes |
| Electronic bass, treble balance, and fader | Yes | Yes | Yes | Yes |
| Preset EQ (Flat, Rock, Pop, Classical, User) | Yes | Yes | Yes | Yes |
| Auto seek/preset scan tuning | Yes | Yes | Yes | Yes |
| Aux-in jack (3.5 mm) for iPod® device/MP3 (front) | Yes | Yes | Yes | Yes |
| Aux-in RCA input (rear) | Yes | No | Yes | Yes |
| Pre-amp line out | No | No | Yes | Yes |
| Up to 30-day memory for presets | Yes | Yes | Yes | Yes |
| Two-wire hookup prevents battery drain | Yes | Yes | Yes | Yes |
| Low battery alarm | Yes | Yes | Yes | Yes |
| Auto shut-off if voltage below 10.8 VDC | Yes | Yes | Yes | Yes |
| iPod direct connect through USB | No | No | Yes | Yes |
| Wireless remote ready (REMVRCC) | Yes | Yes | Yes | Yes |
| Conformal coated circuit boards | Yes | Yes | Yes | Yes |
| Heady-duty design for maximum durability | Yes | Yes | Yes | Yes |
| RoHS compliant | Yes | Yes | Yes | Yes |
| Bluetooth wireless streaming audio (A2DP and AVRCP) | No | No | No | Yes |
| Bluetooth wireless hands-free calls | No | No | No | Yes |
SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. iPhone and iPod are trademarks of Apple Inc.
Radio - 028NLVSWJHD1130WP
SWJHD1130 radio
SWJHD1130WP short-chassis radio
SWJHD1630 radio
SWJHD1635BT radio
SWSXV200B SiriusXM® tuner (left) and SWR169159 SiriusXM antenna (right)
Overview
The heavy-duty stereo solutions provide radio functionality and allows the operator to pair media or mobile devices via an auxiliary jack or the Bluetooth® wireless system.
Benefits
- Increased operator convenience during long working hours
- Auxiliary, USB, and Bluetooth functionality for media playback
Additional details
Heavy-duty radio feature comparison chart
| Feature | SWJHD1130WP | SWJHD1130 | SWJHD1630 | SWJHD1635BT |
| Chassis | DIN | DIN | DIN | DIN |
| Total output power | 30 W x 4 | 40 W x 4 | 45 W x 4 | 45 W x 4 |
| AM/FM stereo with 30 presets (12 AM, 18 FM) | Yes | Yes | Yes | Yes |
| Seven-channel National Oceanic and Atmospheric Administration (NOAA) weatherband tuner | Yes | Yes | Yes | Yes |
| Weather alert | No | No | Yes | Yes |
| Specific area messaging encoding (S.A.M.E.) | No | No | Yes | Yes |
| Electronic U.S./Euro tuner | Digital with RBDS | Digital with RBDS | Digital with RBDS | Digital with RBDS |
| SiriusXM satellite ready (requires SWSXV200B tuner) | No | No | Yes | Yes |
| Quartz digital clock | Yes | Yes | Yes | Yes |
| CD player | No | No | No | No |
| USB on front panel (iPhone® mobile device charging and control) | No | No | Yes | Front and rear |
| Backlighting | Amber/white | Amber/white | Amber/white | Amber/white |
| Segmented high-visibility liquid crystal display (LCD) | Yes | Yes | No | No |
| Full dot matrix high-visibility display | No | No | Yes | Yes |
| Electronic bass, treble balance, and fader | Yes | Yes | Yes | Yes |
| Preset EQ (Flat, Rock, Pop, Classical, User) | Yes | Yes | Yes | Yes |
| Auto seek/preset scan tuning | Yes | Yes | Yes | Yes |
| Aux-in jack (3.5 mm) for iPod® device/MP3 (front) | Yes | Yes | Yes | Yes |
| Aux-in RCA input (rear) | Yes | No | Yes | Yes |
| Pre-amp line out | No | No | Yes | Yes |
| Up to 30-day memory for presets | Yes | Yes | Yes | Yes |
| Two-wire hookup prevents battery drain | Yes | Yes | Yes | Yes |
| Low battery alarm | Yes | Yes | Yes | Yes |
| Auto shut-off if voltage below 10.8 VDC | Yes | Yes | Yes | Yes |
| iPod direct connect through USB | No | No | Yes | Yes |
| Wireless remote ready (REMVRCC) | Yes | Yes | Yes | Yes |
| Conformal coated circuit boards | Yes | Yes | Yes | Yes |
| Heady-duty design for maximum durability | Yes | Yes | Yes | Yes |
| RoHS compliant | Yes | Yes | Yes | Yes |
| Bluetooth wireless streaming audio (A2DP and AVRCP) | No | No | No | Yes |
| Bluetooth wireless hands-free calls | No | No | No | Yes |
SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. iPhone and iPod are trademarks of Apple Inc.
Sirius/XM Tuner - 028NLVSWSXV200B
SWJHD1130 radio
SWJHD1130WP short-chassis radio
SWJHD1630 radio
SWJHD1635BT radio
SWSXV200B SiriusXM® tuner (left) and SWR169159 SiriusXM antenna (right)
Overview
The heavy-duty stereo solutions provide radio functionality and allows the operator to pair media or mobile devices via an auxiliary jack or the Bluetooth® wireless system.
Benefits
- Increased operator convenience during long working hours
- Auxiliary, USB, and Bluetooth functionality for media playback
Additional details
Heavy-duty radio feature comparison chart
| Feature | SWJHD1130WP | SWJHD1130 | SWJHD1630 | SWJHD1635BT |
| Chassis | DIN | DIN | DIN | DIN |
| Total output power | 30 W x 4 | 40 W x 4 | 45 W x 4 | 45 W x 4 |
| AM/FM stereo with 30 presets (12 AM, 18 FM) | Yes | Yes | Yes | Yes |
| Seven-channel National Oceanic and Atmospheric Administration (NOAA) weatherband tuner | Yes | Yes | Yes | Yes |
| Weather alert | No | No | Yes | Yes |
| Specific area messaging encoding (S.A.M.E.) | No | No | Yes | Yes |
| Electronic U.S./Euro tuner | Digital with RBDS | Digital with RBDS | Digital with RBDS | Digital with RBDS |
| SiriusXM satellite ready (requires SWSXV200B tuner) | No | No | Yes | Yes |
| Quartz digital clock | Yes | Yes | Yes | Yes |
| CD player | No | No | No | No |
| USB on front panel (iPhone® mobile device charging and control) | No | No | Yes | Front and rear |
| Backlighting | Amber/white | Amber/white | Amber/white | Amber/white |
| Segmented high-visibility liquid crystal display (LCD) | Yes | Yes | No | No |
| Full dot matrix high-visibility display | No | No | Yes | Yes |
| Electronic bass, treble balance, and fader | Yes | Yes | Yes | Yes |
| Preset EQ (Flat, Rock, Pop, Classical, User) | Yes | Yes | Yes | Yes |
| Auto seek/preset scan tuning | Yes | Yes | Yes | Yes |
| Aux-in jack (3.5 mm) for iPod® device/MP3 (front) | Yes | Yes | Yes | Yes |
| Aux-in RCA input (rear) | Yes | No | Yes | Yes |
| Pre-amp line out | No | No | Yes | Yes |
| Up to 30-day memory for presets | Yes | Yes | Yes | Yes |
| Two-wire hookup prevents battery drain | Yes | Yes | Yes | Yes |
| Low battery alarm | Yes | Yes | Yes | Yes |
| Auto shut-off if voltage below 10.8 VDC | Yes | Yes | Yes | Yes |
| iPod direct connect through USB | No | No | Yes | Yes |
| Wireless remote ready (REMVRCC) | Yes | Yes | Yes | Yes |
| Conformal coated circuit boards | Yes | Yes | Yes | Yes |
| Heady-duty design for maximum durability | Yes | Yes | Yes | Yes |
| RoHS compliant | Yes | Yes | Yes | Yes |
| Bluetooth wireless streaming audio (A2DP and AVRCP) | No | No | No | Yes |
| Bluetooth wireless hands-free calls | No | No | No | Yes |
SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. iPhone and iPod are trademarks of Apple Inc.
Stereo with AM/FM, Weatherband, SIRIUS Satellite and iPod Ready - 028NLVSWJHD1630
SWJHD1130 radio
SWJHD1130WP short-chassis radio
SWJHD1630 radio
SWJHD1635BT radio
SWSXV200B SiriusXM® tuner (left) and SWR169159 SiriusXM antenna (right)
Overview
The heavy-duty stereo solutions provide radio functionality and allows the operator to pair media or mobile devices via an auxiliary jack or the Bluetooth® wireless system.
Benefits
- Increased operator convenience during long working hours
- Auxiliary, USB, and Bluetooth functionality for media playback
Additional details
Heavy-duty radio feature comparison chart
| Feature | SWJHD1130WP | SWJHD1130 | SWJHD1630 | SWJHD1635BT |
| Chassis | DIN | DIN | DIN | DIN |
| Total output power | 30 W x 4 | 40 W x 4 | 45 W x 4 | 45 W x 4 |
| AM/FM stereo with 30 presets (12 AM, 18 FM) | Yes | Yes | Yes | Yes |
| Seven-channel National Oceanic and Atmospheric Administration (NOAA) weatherband tuner | Yes | Yes | Yes | Yes |
| Weather alert | No | No | Yes | Yes |
| Specific area messaging encoding (S.A.M.E.) | No | No | Yes | Yes |
| Electronic U.S./Euro tuner | Digital with RBDS | Digital with RBDS | Digital with RBDS | Digital with RBDS |
| SiriusXM satellite ready (requires SWSXV200B tuner) | No | No | Yes | Yes |
| Quartz digital clock | Yes | Yes | Yes | Yes |
| CD player | No | No | No | No |
| USB on front panel (iPhone® mobile device charging and control) | No | No | Yes | Front and rear |
| Backlighting | Amber/white | Amber/white | Amber/white | Amber/white |
| Segmented high-visibility liquid crystal display (LCD) | Yes | Yes | No | No |
| Full dot matrix high-visibility display | No | No | Yes | Yes |
| Electronic bass, treble balance, and fader | Yes | Yes | Yes | Yes |
| Preset EQ (Flat, Rock, Pop, Classical, User) | Yes | Yes | Yes | Yes |
| Auto seek/preset scan tuning | Yes | Yes | Yes | Yes |
| Aux-in jack (3.5 mm) for iPod® device/MP3 (front) | Yes | Yes | Yes | Yes |
| Aux-in RCA input (rear) | Yes | No | Yes | Yes |
| Pre-amp line out | No | No | Yes | Yes |
| Up to 30-day memory for presets | Yes | Yes | Yes | Yes |
| Two-wire hookup prevents battery drain | Yes | Yes | Yes | Yes |
| Low battery alarm | Yes | Yes | Yes | Yes |
| Auto shut-off if voltage below 10.8 VDC | Yes | Yes | Yes | Yes |
| iPod direct connect through USB | No | No | Yes | Yes |
| Wireless remote ready (REMVRCC) | Yes | Yes | Yes | Yes |
| Conformal coated circuit boards | Yes | Yes | Yes | Yes |
| Heady-duty design for maximum durability | Yes | Yes | Yes | Yes |
| RoHS compliant | Yes | Yes | Yes | Yes |
| Bluetooth wireless streaming audio (A2DP and AVRCP) | No | No | No | Yes |
| Bluetooth wireless hands-free calls | No | No | No | Yes |
SiriusXM is a trademark of Sirius XM Radio Inc. Bluetooth is a trademark of Bluetooth SIG, Inc. iPhone and iPod are trademarks of Apple Inc.
Rear Selective Control Valves
Rear Selective Control Valve Kit - 028NLVBXX10914
BLV11217 Rear SCV Kit shown
BXX10914 Rear SCV Kit shown
BLV11025 Rear SCV Kit shown
BXX10916 Rear SCV Kit shown
Overview
Rear SCV kits include a hydraulic valve, control lever, two rear-mounted couplers and hydraulic lines to operate hydraulic powered rear implements.
Rear Wheel Weights
50-lb (23-kg) Wheel Weight (1), cast iron, 12-in. rear wheel - 028NLVBM17972
UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown)
BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown)
BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown)
BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown)
T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown)
BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown)
Overview
Wheel weights provide extra traction and stability by adding ballast to the rear wheels.
Click here to view the Wheel Weight Compatibility Guide.
50-lb (23-kg) Wheel Weight (1), plastic, rear 12-in. wheel, with mounting hardware - 028NLVBM17976
UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown)
BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown)
BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown)
BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown)
T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown)
BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown)
Overview
Wheel weights provide extra traction and stability by adding ballast to the rear wheels.
Click here to view the Wheel Weight Compatibility Guide.
70-lb (32-kg) Starter Wheel Weight (1), cast iron, rear 12-in. wheel - 028NLVUC13499
UC13499 32-kg (70-lb) cast-iron rear wheel weight (inner and outer face shown)
BM17976 22.7-kg (50-lb) plastic-shell rear wheel weight with hardware, not stackable (inner and outer face shown)
BM17972 22.7-kg (50-lb) cast-iron wheel weight (inner and outer face shown)
BM17965 28.1-kg (62-lb) rear wheel weight (inner and outer face shown)
T19293 48.1-kg (106-lb) rear wheel weight (inner and outer face shown)
BM17968 22-kg (48.5-lb) wheel weight (inner and outer face shown)
Overview
Wheel weights provide extra traction and stability by adding ballast to the rear wheels.
Click here to view the Wheel Weight Compatibility Guide.
Mounting hardware (1) for attaching 70-lb (32-kg) Starter Weight and (2) 50-lb (23-kg) Cast-Iron Weights on 26-in. Tire - 028NLVBM18101
NOTE: Plastic rear-wheel weight comes with necessary hardware for installation.
23-kg (50-lb) cast-iron wheel weights
For 23-kg (50-lb) cast-iron wheel weights on 26x12-in. rear tyres:
NOTE: Order two sets for both sides of the tractor.
33-kg (72-lb) starter cast-iron wheel weight
For 33-kg (72-lb) starter cast-iron wheel weight on 26x12-in. rear tyres:
NOTE: Order two sets for both sides of the tractor.
33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)
For 33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s):
NOTE: Order two sets for both sides of the tractor
Mounting hardware (1) for attaching 70-lb (32-kg) Starter Weight on 26x12-12 Tire - 028NLVBM18089
NOTE: Plastic rear-wheel weight comes with necessary hardware for installation.
23-kg (50-lb) cast-iron wheel weights
For 23-kg (50-lb) cast-iron wheel weights on 26x12-in. rear tyres:
NOTE: Order two sets for both sides of the tractor.
33-kg (72-lb) starter cast-iron wheel weight
For 33-kg (72-lb) starter cast-iron wheel weight on 26x12-in. rear tyres:
NOTE: Order two sets for both sides of the tractor.
33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)
For 33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s):
NOTE: Order two sets for both sides of the tractor
Mounting hardware (1) for attaching two 50-lb (23-kg) Weights on 23-in., 24-in., or 26-in. Tire - 028NLVBM17977
NOTE: Plastic rear-wheel weight comes with necessary hardware for installation.
23-kg (50-lb) cast-iron wheel weights
For 23-kg (50-lb) cast-iron wheel weights on 26x12-in. rear tyres:
NOTE: Order two sets for both sides of the tractor.
33-kg (72-lb) starter cast-iron wheel weight
For 33-kg (72-lb) starter cast-iron wheel weight on 26x12-in. rear tyres:
NOTE: Order two sets for both sides of the tractor.
33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s)
For 33-kg (72-lb) starter and 23-kg (50-lb) cast-iron weight(s):
NOTE: Order two sets for both sides of the tractor
Rear Wheels and Tires
Tire Chains - 028NLVTY15201
Tire chains on X300 Tire
Overview
Tire chains provide added traction in snowy and icy conditions.
Additional details
- Roadmaster tire chains have a single cross-chain design that runs across the tire (resembles a ladder) and is used for on-road and off-road conditions
- Duo Grip tire chains have a dual cross chain design that forms an “H pattern†and is suited specifically for off-road conditions
Tire Chains - 028NLVTY4451
Tire chains on X300 Tire
Overview
Tire chains provide added traction in snowy and icy conditions.
Additional details
- Roadmaster tire chains have a single cross-chain design that runs across the tire (resembles a ladder) and is used for on-road and off-road conditions
- Duo Grip tire chains have a dual cross chain design that forms an “H pattern†and is suited specifically for off-road conditions
Tire chains (pair) for 26x12-12 tires - 028NLVTY15958
Tire chains
Tire chains increase traction dramatically under ice and snow conditions.
NOTE: Not intended for use on all four rear tires on the TH 6x4.
Three-Point Hitch
3-Point Hitch Tractor Receiver Hitch - 028NLVLP25001
LP25001 3pt hitch receiver hitch shown
Overview
Move trailers and other wheeled implements easily with the 3-point receiver hitch.
Benefits
- Easily move trailers and other wheeled implements
- Accepts standard 2-inch receivers ball mounts
- Compatible with CAT 1 IMatch Quick Hitch or and CAT 1 3pt tractor hitch
Magnetic hitch pin - 028NLVLP63768
Magnetic hitch pin
Fits John Deere lawn and garden tow behind attachments.
- Strong magnetic grip
- Rust resistant
- Easy to install, secure fit
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
Magnetic hitch pin
Order number: LP63768
iMatch™ Bushing Kit - 028NLVLP19969
iMatch Quick-Hitch bushing
Ordering information
Customers, please contact your local John Deere dealer for availability and pricing information.
iMatch Quick-Hitch Bushings
Order number: LP19969
iMatch™ Quick-Hitch Category 1 with adjustable top hook - 028NLVLVB25976
iMatch Quick-Hitch (LVB25255)
iMatch Quick-Hitch with rotary cutter hookup (LVB25255)
iMatch Quick-Hitch (LVB25976)
iMatch Quick-Hitch with rotary cutter hookup (LVB25976)
One of the greatest customer concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.
- All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.
NOTE: In the picture above, you see the bushing set. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
- Upper bushing
- Inside diameter: 0.76-0.77 in.
- Outside diameter: 1.24-1.25 in.
- Lower bushings
- Inside diameter: 0.88 to 0.89 in.
- Outside diameter: 1.43 to 1.44 in.
iMatch™/Quik-Coupler Bushing Kit - 028NLVBW15056
iMatch quick-coupler bushing kit
This bushing kit is for use with Category 1 implements (ballast box) to make them function correctly with the iMatch Quick-Hitch.