John Deere 913 V-Ripper
- Adjustable standard spacing prevents side movement
- V-pattern frame promotes leading-edge shattering
- LaserRip™ Extreme points
- Heavy-duty steel ripper points
- Get a Quote Schedule Demo Build Your Own
- Find My Location
- Payment Calculator
- View Product Brochure
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Use the Loan Calculator to help you determine the financing and payment options that are best for you.
**The accuracy of this calculator and its applicability to your circumstances is not guaranteed. You should obtain personal advice from qualified professionals. This information is provided for illustrative purposes only and does not constitute an application. This notice does not guarantee loan approval, nor is it an offer or commitment to make a loan to you on the above terms.
Strong V-pattern frame promotes leading-edge shattering of center shank and material flow
The frame design of the 913 V-Ripper positions the standards in a V pattern:
- Promotes leading-edge shattering of the center shank and material flow through the machine
The 127-mm x 178-mm (5-in. x 7-in.) cross-section frame has 10-mm (3/8-in.) thick walls:
- Provides strength to handle tractors of up to 150 power take-off (PTO) horsepower
- Same frame-size tubing as non-expandable 915 V-Ripper
- Parking stands are included in base equipment
Two-position integral hitch to meet operator requirements
3-point hitch hookup is for Category 2 or 3N tractors.
The integral hitch can be set to two positions:
- 1 = Low position
Gives maximum transport clearance and allows ripping to approximately 508 mm (20 in.) deep with the 838-mm (33-in.) standards.
- 2 = High position
Enables ripping to a maximum depth of 584 mm (23 in.) deep with the 838-mm (33-in.) standards.
Soil probe helps to determine proper operating depth
The soil probe helps operators to determine the proper operating depth of their ripper points,
38 mm (1.5 in.) below the bottom of the compaction layer.
The probe allows obtaining the maximum amount of soil fracturing from the entire family of John Deere ripper points. Marked in 51-mm (2-in.) increments from 254 mm to 559 mm (10 in. to 22 in.), the probe provides accurate feedback of compaction layer depth.
It is stored on the mainframe of the ripper for convenient access. The operator's manual explains the proper use of the soil probe.
Accessories and Attachments
The Category 4/4N Quik Coupler is designed for use with Category 4/4N implements only; however, if you desire to use Category 3N implements, these parts can be ordered. (Implement has to have wide lower hitch points to match 4N lower coupler arms.)
For steel Quik Coupler:
The lower coupler jaws will also require bushings to adapt a Category 3 implement to a Category 4 Quik Coupler.
Adapter bushings are available through implement factory service (Parts). Four lengths of adapters are available. Each implement will require two bushings.
A heavy-duty knife opens up subsoil and kills weeds by shearing off roots.
Each knife is 610 mm (24 in.) long and cuts 267 mm (10.5 in.) on each side of the standard.
The blade is 76 mm x 8 mm (3 in. x 5/16 in.) and is sharpened on leading edge.
NOTE: Not for use with spring-reset standards or straight shanks.
Centre Hall, PA
East Palestine, OH
Fairmount City, PA
Niagara Falls, NY