John Deere 8370RT

John Deere 8370RT for sale at LandPro Equipment; NY & PA. Serving your new and used equipment needs from Alexander, Avon, Brockport, Clymer, Falconer, Hall, Macedon, Oakfield, Savannah, Springville, NY, and Edinboro, PA.

Would you like more information from LandPro Equipment? Request A Quote Here
CroppedImage500278-8370RT.jpg

8R/8RT Series

 

  • 370 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • CommandView™ III cab featuring the Generation 4 CommandCenter™
Manufacturer John Deere
Model 8370RT (MY2014)
Specifications  
Nebraska Test number TBD Nebraska Test
Manufacturer John Deere
Engine family 9.0L: EJDXL09.0301
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Cylinders/Displacement, cu. in. (L) 6 / 9.0 L
  549 cu in.
Cylinder Liners Wet
Fuel tank capacity, US Gal. (L) (Open; Cab) ---
Standard 200 gal.
  758 L
Optional ---
Underhood muffler ---
Advertised PTO hp (kW) @ Rated rpm 308 @ 2100 per SAE PTO hp
  229 kW
Official PTO hp (kW) @ Rated rpm ---
@ Standard PTO @ Eng rpm ---
Maximum @ Eng rpm ---
Advertised Engine hp (kW) @ Rated speed 370 @ 2100 per 97/68EC PS engine hp
  272 kW
Max Unballast Drwbr hp (kW) @ Eng rpm ---
Maximum Torque (PTO) @ rpm, lb-ft (Nm) ---
Max Torque Rise (80% rtd spd) @ Eng rpm ---
Maximum Torque Rise % (PTO) @ Eng rpm ---
PTO @ Rated Eng rpm ---
Standard PTO Speed @ Eng speed ---
Maximum PTO Power @ Eng rpm ---
Maximum Engine Power @ Eng rpm ---
Max Unballasted Drawbar Power @ Eng rpm ---
75% Load, Full Engine rpm (Unballasted) ---
75% Load @ Reduced rpm (Unballasted) ---
Std. Transmission; Forward/Reverse IVT
Opt. Transmission; Forward/Reverse ---
Reverser Left-hand or Right-hand
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper IVT
Standard 1-3/4 in., 20-spline, 1,000-rpm
Optional ---
PTO Speeds @ Engine rpm 1000 PTO rpm @ 2000 engine rpm
PTO Actuation Electro-hydraulic
Type Closed-center, pressure/flow compensated
Pump Rated Output, GPM (L/min.) ---
Standard 60 gpm
  227.1 L/min
Optional ---
Rated Flow @ One SCV, GPM (L/min.) Rear: 35 1/2 in. coupler; 40.5 3/4 in. coupler gpm
  Rear: 132 1/2 in. coupler; 153 3/4 in. coupler L/min
Max Output @ SCV Couplers, GPM (L/min.) ---
Maximum Operating Pressure, psi (kPa) 2958 psi
  20,400 + or- 300 kPa
Maximum Hydraulic Power, hp (kW) ---
Hitch Draft Control Load Sense Type Electronic
Remote Control Valves Available 4 (Standard), 5, 6
Hitch Category (SAE Designation) Cat 4N/3
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. ---
OECD ---
Standard 15000 Cat 4N/3 lb
  6803 Cat 4N/3 kg
Optional 20000 Cat 4N/3 lb
  9702 Cat 4N/3 kg
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE) ---
Standard ---
Optional ---
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE) ---
Standard ---
Optional ---
Sensing type Electro-hydraulic
Joystick SCV control Electro-hydraulic optional
Type Inboard planetary
Differential controls ---
Availability ---
Front ---
Front & Rear ---
Engage On-the-Go Rear Differential Lock Yes
Axle Type Bar
Brakes, Type and Control Hydraulic wet disc
Rollover Protective Structure, OOS ---
Rigid - Foldable - Telescopic ---
Platform - Flat/Straddle ---
Gearshift Location - Console/Floor CommandARM
Cab ---
Doors LH
Platform - Flat/Straddle Flat
dB(A) Rating ---
Seat Suspension System Air std.
Wheelbase, in. (mm) ---
Front Tread Range, in. (mm) ---
Rear Tread Range, in. (mm) ---
Minimum Rear Tread Setting, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft (m) ---
Turning Radius w/o Brakes, ft (m) ---
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab ---
Wheelbase, in. (mm) ---
Front Tread Range, in. (mm) ---
Front Axle Clearance, in. (mm) ---
Turning Radius w/Brakes, ft (m) ---
Turning Radius w/o Brakes, ft (m) ---
Limited Slip Differential ---
Unballasted Operating Weight, lb (kg) ---
Approx. Ship Wgt, lb (kg) Open; Cab ---
Wheelbase, in. (mm) 99 in.
  2515 mm
Wheel Tread, Min. to Max. in. (mm) 72 to 120 Standard, 112 to 160 Optional in.
  1828.8-3048 Standard, 2844.8-4064 Optional mm
Turning Radius w/o Brakes, ft (m) ---
Nebraska Test Unballasted w/Duals, lb (kg) ---
Unballasted Weight, lb (kg) 36549 IVT/30 gals fuel/25 in. tracks/no weights lb
  16578 IVT/30 gals fuel/25 in. tracks/no weights kg
2WD ---
Front ---
Rear ---
MFWD ---
Front ---
Rear ---
4WD ---
Track widths 25 Standard; 16, 18, 24, 30 Optional in.
  635 Standard; 406, 457, 610, 762 Optional mm
Country of Manufacture Waterloo, IA USA
Ballasting Restrictions, lb (kg) Refer to operator's manual
*Notes ---

Fields with asterisks* and highlighted red are required. Please email our helpful staff with any questions or comments using the contact form.

Fields with asterisks* and highlighted red are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

APPLY ONLINE!

Apply Online Now!

Contact Us

HAVE A QUESTION?

Let us help you get moving.